AMP MMIC SI BIPOLAR 05-SMD PLAST

MSA-1105-STRG

Manufacturer Part NumberMSA-1105-STRG
DescriptionAMP MMIC SI BIPOLAR 05-SMD PLAST
ManufacturerAvago Technologies US Inc.
TypeGeneral Purpose Amplifier
MSA-1105-STRG datasheets
 


Specifications of MSA-1105-STRG

Noise Figure3.6dBPackage / Case4-SMD (05 Plastic)
Current - Supply80mAFrequency50MHz ~ 1.3GHz
Gain10dB ~ 12dBP1db17.5dBm
Test Frequency500MHzVoltage - Supply4.4V ~ 6.6V
Bandwidth1300 MHzMounting StyleSMD/SMT
Number Of Channels1Operating Frequency1300 MHz
Operating Supply Voltage5.5 VSupply Current80 mA
Maximum Power Dissipation550 mWMaximum Operating Temperature+ 150 C
Amplifier TypeMMICCurrent, Input Bias60 mA
Current, Supply80 mAImpedance, Thermal125 °C/W
Package Type05 PlasticPower Dissipation550 mW
Propagation Delay200 psVoltage, Supply5.5 V
Lead Free Status / RoHS StatusLead free / RoHS CompliantRf Type-
Other names516-1968
MSA-1105-STRG
  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
Page 1/4

Download datasheet (153Kb)Embed
Next
MSA-1105
Cascadable Silicon Bipolar MMIC Amplifier
Data Sheet
Description
The MSA-1105 is a high performance silicon bipolar
Monolithic Microwave Integrated Circuit (MMIC) housed
in a low cost, surface mount plastic package. This MMIC
is designed for high dynamic range in either 50 or 75 Ω
systems by combining low noise figure with high IP
Typical applications include narrow and broadband linear
amplifiers in commercial and industrial systems.
The MSA-series is fabricated using Avago’s 10 GHz
f
, 25 GHz f
silicon bipolar MMIC process which
T
MAX
uses nitride self-alignment, ion implantation, and
gold metallization to achieve excellent performance,
u niformity and reliability. The use of an external bias
resistor for temperature and current stability also allows
bias flexibility.
05 Plastic Package
Features
High Dynamic Range Cascadable 50Ω or
75Ω Gain Block
3 dB Bandwidth: 50 MHz to 1.3 GHz
• 17.5 dBm Typical P
at 0.5 GHz
.
1 dB
3
• 3.6 dB Typical Noise Figure at 0.5 GHz
• Surface Mount Plastic Package
• Tape-and-Reel Packaging Option Available
Lead-free Option Available
Typical Biasing Configuration
4
C
block
3
IN
MSA
1
V
d
2
R
bias
V
>
V
8
CC
RFC (Optional)
C
block
OUT
= 5.5 V

MSA-1105-STRG Summary of contents

  • Page 1

    ... Monolithic Microwave Integrated Circuit (MMIC) housed in a low cost, surface mount plastic package. This MMIC is designed for high dynamic range in either Ω systems by combining low noise figure with high IP Typical applications include narrow and broadband linear amplifiers in commercial and industrial systems. The MSA-series is fabricated using Avago’s 10 GHz GHz f silicon bipolar MMIC process which T MAX ...

  • Page 2

    ... Device Voltage d dV/dT Device Voltage Temperature Coefficient Notes: 1. The recommended operating current range for this device mA. Typical performance as a function of current is on the following page. 2. Referenced from 50 MHz gain (GP). Ordering Information Part Numbers No. of Devices MSA-1105-STR 10 MSA-1105-STRG 100 MSA-1105-TR1 500 MSA-1105-TR1G 500 MSA-1105-TR 1500 MSA-1105-TRG 1500 Note: Order part number with a “G” suffix if lead-free option is desired.  [1] Absolute Maximum ...

  • Page 3

    ... MSA-1105 Typical Scattering Parameters (Z Freq GHz Mag Ang .0005 .80 –17 .005 .6 –6 .05 .07 –48 .050 .06 –38 .100 .05 –41 .00 .06 –58 .300 .07 –74 .400 .09 –91 .500 .10 –105 .600 .11 –116 .700 .13 –18 .800 .15 –136 .900 .16 –145 1.000 .18 –15 1.500 .8 174 .000 .38 150 .500 ...

  • Page 4

    Plastic Package Dimensions 4 GROUND 0.030 0.89 RF OUTPUT RF INPUT AND DC BIAS A 1 0.030 ± 0.010 0.76 ± 0.25 (4 PLCS) GROUND 2 0.135 ± 0.015 0.030 3.42 ± 0.25 0.76 (4 PLCS) 0.020 0.050 0.145 ...