IC AMP MMIC BIPOLAR 80MA 05-SMD

MSA-1105-TR1

Manufacturer Part NumberMSA-1105-TR1
DescriptionIC AMP MMIC BIPOLAR 80MA 05-SMD
ManufacturerAvago Technologies US Inc.
MSA-1105-TR1 datasheet
 


Specifications of MSA-1105-TR1

Current - Supply80mAFrequency50MHz ~ 1.3GHz
Gain12dBNoise Figure3.6dB
P1db17.5dBmPackage / Case4-SMD (05 Plastic)
Rf TypeISM, PCS, WLL, 802.16/WiMaxTest Frequency500MHz
Voltage - Supply4.4V ~ 6.6VManufacturer's TypeMMIC Amplifier
Number Of Channels1Supply Current80mA
Frequency (max)1.3GHzOperating Supply Voltage (min)4.4V
Operating Supply Voltage (typ)5.5VOperating Supply Voltage (max)6.6V
Power Dissipation550mWPackage TypeCase 05
MountingSurface MountPin Count4
Noise Figure (typ)3.6@500MHzdBLead Free Status / RoHS StatusContains lead / RoHS non-compliant
Other names516-1517-2  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
Page 1/4

Download datasheet (153Kb)Embed
Next
MSA-1105
Cascadable Silicon Bipolar MMIC Amplifier
Data Sheet
Description
The MSA-1105 is a high performance silicon bipolar
Monolithic Microwave Integrated Circuit (MMIC) housed
in a low cost, surface mount plastic package. This MMIC
is designed for high dynamic range in either 50 or 75 Ω
systems by combining low noise figure with high IP
Typical applications include narrow and broadband linear
amplifiers in commercial and industrial systems.
The MSA-series is fabricated using Avago’s 10 GHz
f
, 25 GHz f
silicon bipolar MMIC process which
T
MAX
uses nitride self-alignment, ion implantation, and
gold metallization to achieve excellent performance,
u niformity and reliability. The use of an external bias
resistor for temperature and current stability also allows
bias flexibility.
05 Plastic Package
Features
High Dynamic Range Cascadable 50Ω or
75Ω Gain Block
3 dB Bandwidth: 50 MHz to 1.3 GHz
• 17.5 dBm Typical P
at 0.5 GHz
.
1 dB
3
• 3.6 dB Typical Noise Figure at 0.5 GHz
• Surface Mount Plastic Package
• Tape-and-Reel Packaging Option Available
Lead-free Option Available
Typical Biasing Configuration
4
C
block
3
IN
MSA
1
V
d
2
R
bias
V
>
V
8
CC
RFC (Optional)
C
block
OUT
= 5.5 V

MSA-1105-TR1 Summary of contents

  • Page 1

    ... Monolithic Microwave Integrated Circuit (MMIC) housed in a low cost, surface mount plastic package. This MMIC is designed for high dynamic range in either Ω systems by combining low noise figure with high IP Typical applications include narrow and broadband linear amplifiers in commercial and industrial systems. The MSA-series is fabricated using Avago’s 10 GHz GHz f silicon bipolar MMIC process which T MAX ...

  • Page 2

    ... Device Voltage Temperature Coefficient Notes: 1. The recommended operating current range for this device mA. Typical performance as a function of current is on the following page. 2. Referenced from 50 MHz gain (GP). Ordering Information Part Numbers No. of Devices MSA-1105-STR 10 MSA-1105-STRG 100 MSA-1105-TR1 500 MSA-1105-TR1G 500 MSA-1105-TR 1500 MSA-1105-TRG 1500 Note: Order part number with a “G” suffix if lead-free option is desired.  [1] Absolute Maximum 80 mA 550 mW +13 dBm 150°C – ...

  • Page 3

    ... MSA-1105 Typical Scattering Parameters (Z Freq GHz Mag Ang .0005 .80 –17 .005 .6 –6 .05 .07 –48 .050 .06 –38 .100 .05 –41 .00 .06 –58 .300 .07 –74 .400 .09 –91 .500 .10 –105 .600 .11 –116 .700 .13 –18 .800 .15 –136 .900 .16 –145 1.000 .18 –15 1.500 .8 174 .000 .38 150 .500 ...

  • Page 4

    Plastic Package Dimensions 4 GROUND 0.030 0.89 RF OUTPUT RF INPUT AND DC BIAS A 1 0.030 ± 0.010 0.76 ± 0.25 (4 PLCS) GROUND 2 0.135 ± 0.015 0.030 3.42 ± 0.25 0.76 (4 PLCS) 0.020 0.050 0.145 ...