X2-Z11-E-A Digi International, X2-Z11-E-A Datasheet - Page 165

• Manufacturer Part Number: X2-Z11-E-A
• Description: CONNECTPORT X2 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X2r

Specifications of X2-Z11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ-45
• Sensitivity: -82dBm
• Power - Output: 16dBm
• Data Rate - Maximum: 11Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: Ethernet
• Modulation: DBPSK, DQPSK
• Security: SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 1.2 W
• Antenna: 4 in Dipole
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1173

Manually configure a Digi device to connect to the iDigi Platform
To use iDigi Platform as a device manager for your Digi device, you need to manually configure
the Digi device to connect to iDigi Platform.
1
2
3
4
Managing alarms through a remote management server
All alarms can be sent to a remote management server for display and management from that
interface. See "Alarms" on page 151.
Open the web interface for the Digi device and go to
Configuration > Remote Management.
On the Remote Management settings page, enter the URL of the iDigi Platform
connectivity server (for example, sd1-na.idigi.com) in the Server Address field under
Client-Initiated Management Connection. You can find this URL from the iDigi Platform
user portal screen header near the top of the screen under About > Log Off.
Click the check box labeled
Automatically reconnect to the server after being disconnected.
Click Apply.
C o n f i g u r e D i g i d e v i c e s
1 6 5