X2-Z11-E-A Digi International, X2-Z11-E-A Datasheet - Page 198

• Manufacturer Part Number: X2-Z11-E-A
• Description: CONNECTPORT X2 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X2r

Specifications of X2-Z11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ-45
• Sensitivity: -82dBm
• Power - Output: 16dBm
• Data Rate - Maximum: 11Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: Ethernet
• Modulation: DBPSK, DQPSK
• Security: SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 1.2 W
• Antenna: 4 in Dipole
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1173

Gateway device details
Network view of the XBee devices
Python Application XBee Socket Counters
Python Application XBee Socket Error Counts
This part of the display shows information about the Digi device and its role as a gateway
device in the XBee network. It shows the current
for the XBee network.
This part of the display shows the gateway and any devices that have joined the XBee
network. Click the Discover XBee Devices button to refresh the list of devices that have
joined the xbee network. (The discovery operation may take a few seconds.) Click on a
device's table entry to view more detailed information of the state of that device.
This section includes data counters that are specific to XBee Sockets implemented using a
Python application.
This section includes error counters that are specific to XBee Sockets implemented using a
Python application. These values will help determine the quality of data that is being sent or
received, and are useful in troubleshooting communication errors in an XBee network.
transmitted due to an I/O error.
be transmitted due to a CCA error.
be transmitted due to an ACK error.
to be transmitted to an unjoined node.
attempted to transmit to itself.
destination address could not be found.
destination could not be found.
receive.
of internal buffers.
Frames Sent: The total number of transmitted frames.
Frames Received: The total number of received frames.
Bytes Sent: The total number of bytes sent.
Bytes Received: The total number of bytes received.
Transmit I/O Errors: The total number of transmitted frames that could not be
Transmit CCA Failures: The total number of transmitted frames which could not
Transmit ACK Failures: The total number of transmitted frames which could not
Not Joined Errors: The total number of transmitted frames which were attempted
Self Addressed Errors: The total number of transmitted frames for which a node
No Address Errors: The total number of transmitted frames for which the
No Route Errors: The total number of transmitted frames for which a router to the
Receive Frame Errors: The total number of frames where an error occurred on
Received Bytes Dropped: The total number of bytes dropped due to an exhaustion
M o n i t o r a n d m a n a g e D i g i d e v i c e s
PAN ID, Channel, and address in use
1 9 8