X2-Z11-E-A Digi International, X2-Z11-E-A Datasheet - Page 203

• Manufacturer Part Number: X2-Z11-E-A
• Description: CONNECTPORT X2 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X2r

Specifications of X2-Z11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ-45
• Sensitivity: -82dBm
• Power - Output: 16dBm
• Data Rate - Maximum: 11Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: Ethernet
• Modulation: DBPSK, DQPSK
• Security: SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 1.2 W
• Antenna: 4 in Dipole
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1173

Manage network services
Management > Network Services displays information about active network services. Currently,
the only network-service management task possible from this page is managing the DHCP server.
Manage DHCP server operation
DHCP server management operations include:



Start, stop, and restart the DHCP server
The DHCP Server Management page shows the current status of the DHCP server. Depending on
the current status, there are buttons to start, stop, or restart the DHCP server. Click the appropriate
button to perform your request.
Note
View and manage current DHCP leases
The DHCP server maintains a current list of its leases, reservations and unavailable addresses. The
displayed lease list may contain entries that report a variety of status descriptions. The Lease Status
types are identified and described below.
Even after a lease has expired or is released by a DHCP client, the associated IP address is not
immediately returned to the available address pool. Rather, there is a non-configurable
grace period during which the lease record is retained by the DHCP server. At the end of that
grace period, the lease record is automatically deleted and the associated IP address is returned to
the available address pool. Where a grace period is observed, this is indicated in the Lease Status
descriptions below.
The grace period is incorporated in the DHCP server to increase the consistency of offering the
same IP address to a DHCP client, even if that client is rebooted or off the network for a period of
time that does not exceed the grace period.
Leases can be removed from the DHCP server while the server is running. To remove a lease,
select the checkbox to the left of the lease information in the table of leases, then click the Remove
button below the lease table. To remove all leases, select the checkbox to the left of the descriptive
headings at the top of the table, then click the Remove button below the lease table.
Note
View DHCP server status.
Start/stop/restart the DHCP server.
View and manage current DHCP leases.
Stopping, restarting, or rebooting the DHCP server causes all information on IP
Removing a lease will cause the associated IP address to be returned immediately to
address leases to be lost. All leased addresses except for reservations will be returned
to the available address pool and may be served in a new lease to a DHCP client.
the available address pool. Any IP address in this available address pool may be
served in a new lease to a DHCP client. Static lease reservations will always display
in the lease list. These reservation leases may be removed, but a new lease will be
created immediately. To disable or permanently remove a reservation, use the DHCP
server Settings page in the Network Configuration area.
M o n i t o r a n d m a n a g e D i g i d e v i c e s
2 0 3