X2-Z11-E-A Digi International, X2-Z11-E-A Datasheet - Page 219

• Manufacturer Part Number: X2-Z11-E-A
• Description: CONNECTPORT X2 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X2r

Specifications of X2-Z11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ-45
• Sensitivity: -82dBm
• Power - Output: 16dBm
• Data Rate - Maximum: 11Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: Ethernet
• Modulation: DBPSK, DQPSK
• Security: SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 1.2 W
• Antenna: 4 in Dipole
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1173

Cellular
Activity
Link &
LEDs
Connector
Antenna
Primary
Cellular
ConnectPort X8 has the reset button on the front panel.
3
4
5
6
7
Hold the Reset button down gently with a non-conductive, small diameter tool (such as
wood or plastic) with a blunt end (NOT SHARP or the button could be damaged). Power on
the device while holding the Reset button down.
After a few seconds you may see a 1-1-1 blink once on some devices.
Wait until you see the Status LED blink a 1-5-1 pattern, then release the reset button.
Wait for the device to boot up. At this time, the configuration is returned to factory defaults.
Now, if desired, power off the device, though this is not necessary. Powering off the device
before releasing the button guarantees the configuration will NOT be reverted. Powering off
the device just after releasing the button will result in an unknown configuration, possibly
having some or all settings reverted to defaults.
Strength
Cellular
SinLEDs
Cellular
Signal
LEDs
Connector
(optional)
Antenna
Wi-Fi
XBee Link
& Activity
LEDs
Connector
Antenna
XBee
Wi-Fi Link
& Activity
LEDs
button
Reset
D i g i d e v i c e a d m i n i s t r a t i o n
Status
LED
Secondary
Connector
diversity)
Antenna
Cellular
(dual
Power input
9-30 VDC
Power
LED
2 1 9