X2-Z11-E-A Digi International, X2-Z11-E-A Datasheet - Page 244

• Manufacturer Part Number: X2-Z11-E-A
• Description: CONNECTPORT X2 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X2r

Specifications of X2-Z11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ-45
• Sensitivity: -82dBm
• Power - Output: 16dBm
• Data Rate - Maximum: 11Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: Ethernet
• Modulation: DBPSK, DQPSK
• Security: SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 1.2 W
• Antenna: 4 in Dipole
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1173

XBee Activity
Wi-Fi Link
Wi-Fi Activity
Cellular Signal
Strength LEDs
Reset button
LED/button
Off
Blinking yellow
Solid yellow
Blinking green
Green
Light Pattern
Color and
ConnectPort X8 LEDs and buttons
There is no XBee network activity
Serial data is being sent between the XBee RF module and the gateway.
For more information on this indicator, see the description of the D5
(DIO5 Configuration) parameter in the product manual for the XBee RF module.
Wi-Fi link is up.
Wi-Fi traffic is on the link.
Relative signal strength indicator (RSSI), shown as a number of LEDs.
 
 
 
Specific dB values for the signal can be found via the web interface; go to
Administration > System Information > Mobile . Under Mobile Connection, the
signal strength is displayed in bars and dBm. Or, from the command line. enter the
display mobile command.
Single press : Performs equivalent of a power-cycle.
Press and hold : Resets device configuration settings to factory defaults (factory reset).
0: signal strength unknown or unacceptable
1: signal strength low/weak
3: signal strength high/excellent
Description
T r o u b l e s h o o t i n g
2 4 4