X2-Z11-E-A Digi International, X2-Z11-E-A Datasheet - Page 39

• Manufacturer Part Number: X2-Z11-E-A
• Description: CONNECTPORT X2 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X2r

Specifications of X2-Z11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ-45
• Sensitivity: -82dBm
• Power - Output: 16dBm
• Data Rate - Maximum: 11Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: Ethernet
• Modulation: DBPSK, DQPSK
• Security: SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 1.2 W
• Antenna: 4 in Dipole
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1173

Connector pinouts
Hardware installation for ConnectPort X4 H
The ConnectPort X4 H has three connectors.



2-pin power connector pinouts
1
2
Pin
The 2-pin power connector is properly wired before shipping.
The 9-pin RS-232, RS-422, and RS-485 connector must be wired by the customer
according to the wiring diagram and pinout table.
The 14-pin input/output connector must also be wired by the customer according to the
wiring diagram and pinout table. If you have purchased a 2-analog 2-digital input
version of this product, Input/Output 1 and Input/Output 2 are the two analog inputs,
and Input/Output 3 and Input/Output 4 are the two digital inputs. Pins 13 and 14 provide
power and ground for an optional Ethernet hub.
+9 to 30 VDC N
GND
Function
H a r d w a r e i n s t a l l a t i o n
3 9