X2-Z11-E-A Digi International, X2-Z11-E-A Datasheet - Page 77

no-image

X2-Z11-E-A

Manufacturer Part Number
X2-Z11-E-A
Description
CONNECTPORT X2 2.4GHZ
Manufacturer
Digi International
Series
ConnectPort™ X2r
Datasheets

Specifications of X2-Z11-E-A

Function
Transceiver, Xbee, Gateway
Modulation Or Protocol
UDP/TCP, DHCP, SNMPv1
Frequency
2.4GHz
Applications
General Purpose
Interface
RJ-45
Sensitivity
-82dBm
Power - Output
16dBm
Data Rate - Maximum
11Mbps
Voltage - Supply
12VDC
Wireless Frequency
2.4 GHz
Interface Type
Ethernet
Modulation
DBPSK, DQPSK
Security
SSL Tunnel
Operating Voltage
9 V to 30 V
Output Power
1.2 W
Antenna
4 in Dipole
Operating Temperature Range
- 30 C to + 70 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
602-1173
Telnet Server
Telnet Passthrough
Transmission Control Protocol (TCP)
Echo
Transmission Control Protocol (TCP)
Passthrough
User Datagram Protocol (UDP) Echo
User Datagram Protocol (UDP)
Passthrough
Web Server, also known as HyperText
Transfer Protocol (HTTP)
Secure Web Server, also known as
HyperText Transfer Protocol over Secure
Socket Layer (HTTPS)
Service
Network services and IP pass-through
The IP pass-through feature (Configuration > Network > IP Pass-through) causes the Digi
device to be bridged transparently between the Ethernet and mobile data links. Enabling IP Pass-
through disables many device features, including many network services. To provide access to the
device for configuration and management purposes, you can configure a subset of network
services to terminate at the Digi device instead of being passed on to a connected device such as a
router. In the IP pass-through feature, these network services are called pinholes. Services that can
be configured as pinholes include HTTP, HTTPS, Telnet, SSH, and SNMP. See "IP pass-through
settings" on page 98 for more information.
Allows users an interactive Telnet session to the Digi device’s
command-line interface.
If disabled, users cannot Telnet to the device.
Allows a Telnet connection directly to the serial port, often referred to
as reverse Telnet.
Used for testing the ability to send and receive over a TCP connection,
similar to a ping.
Allows a raw socket connection directly to the serial port, often
referred to as reverse sockets.
Used for testing the ability to send and receive over a UDP connection,
similar to a ping.
Allows raw data to be passed between the serial port and UDP
datagrams on the network.
Access to web pages for configuration that can be secured by requiring
a user login.
HTTP and HTTPS, below, are also referred to as Web Server or
Secure Web Server. These services control the use of the web
interface. If HTTP and HTTPS are disabled, device users cannot use
the web interface to configure, monitor, and administer the device.
Access to web pages for configuration that can be secured by requiring
a user login, with encryption for greater security.
Services provided
C o n f i g u r e D i g i d e v i c e s
23
2001
7
2101
7
2101
80
443
network
number
Default
port
7 7

Related parts for X2-Z11-E-A