X4-A11-W-A Digi International, X4-A11-W-A Datasheet - Page 158

• Manufacturer Part Number: X4-A11-W-A
• Description: PORT XBEE 802.15.4 - WIFI802.11G
• Manufacturer: Digi International
• Series: ConnectPort™ X4r

Specifications of X4-A11-W-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: 802.15.4 Zigbee
• Frequency: 2.4GHz
• Interface: 1 USB, 1 RS-232, 1 RJ-45
• Sensitivity: -93dBm
• Power - Output: 15dBm
• Data Rate - Maximum: 54Mbps
• Voltage - Supply: 6 V ~ 30 V
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232, Ethernet, SMA
• Security: NAT, DES, 3DES, 256 bit AES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Applications: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: NS9360
• Other names: 602-1109

Standard RFCs and MIBs:
RFC 1213
RFC 1215
RFC 1316
RFC 1317
Digi enterprise MIBs:
Digi Connect Device
Info MIB
Digi Connect
Mobile Information
MIB
Digi Connect
Wireless LAN MIB
Digi Host Resources
MIB
Digi Serial Alarm
Traps Management
Number
Simple Network Management Protocol (SNMP)
Simple Network Management Protocol (SNMP) is a protocol that can be used to manage and
monitor network devices. Digi devices can be configured to use SNMP features, or SNMP can be
disabled entirely for security reasons. To configure SNMP settings, click the
Simple Network Management Protocol link at the bottom of the System Configuration page.
Supported SNMP-related RFCs, MIBs, and traps
Digi devices support these SNMP-related Request for Comments (RFCs) and Management
Information Bases (MIBs):
Management Information Base (MIB) II. This is a MIB for managing
a TCP/IP network. It is an update of the original MIB, now called
MIB-I. MIB-II contains variable definitions that describe the most
basic information needed to manage a TCP/IP network. These
variable definitions are organized into several groups, such as groups
for managing the system, network interfaces, address translation,
transmission media, and various protocols, including IP, ICMP, TCP,
UDP, EGP, and SNMP.
Generic Traps (coldStart, linkUp, authenticationFailure only)
Character MIB
RS-232 MIB
A Digi enterprise MIB for handling and displaying basic device
information, such as firmware revisions in use, device name, IP
network information, memory use, and CPU statistics.
A Digi enterprise MIB for handling and displaying device
information for mobile devices.
A Digi enterprise MIB for handling and displaying basic device
information for wireless devices.
A Digi enterprise MIB for use with managing host systems, where
“host” means any computer that communicates with other similar
computers attached to the internet and that is directly used by one or
more human beings.
A Digi enterprise MIB for sending alarms as SNMP traps.
Description
http://www.ietf.org/rfc/rfc1213.txt
http://www.ietf.org/rfc/rfc1215.txt
http://tools.ietf.org/html/rfc1316
http://tools.ietf.org/html/rfc1317
http://ftp1.digi.com/support/utilities/
Digi Part number 40002410_x.mib
http://ftp1.digi.com/support/utilities/
Digi Part number 40002593_x.mib
http://ftp1.digi.com/support/utilities/
Digi Part number 40002325_x.mib
http://ftp1.digi.com/support/utilities/
Digi Part number 40002411_x.mib
C o n f i g u r e D i g i d e v i c e s
Location
1 5 8