X4-A11-W-A Digi International, X4-A11-W-A Datasheet - Page 176

• Manufacturer Part Number: X4-A11-W-A
• Description: PORT XBEE 802.15.4 - WIFI802.11G
• Manufacturer: Digi International
• Series: ConnectPort™ X4r

Specifications of X4-A11-W-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: 802.15.4 Zigbee
• Frequency: 2.4GHz
• Interface: 1 USB, 1 RS-232, 1 RJ-45
• Sensitivity: -93dBm
• Power - Output: 15dBm
• Data Rate - Maximum: 54Mbps
• Voltage - Supply: 6 V ~ 30 V
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232, Ethernet, SMA
• Security: NAT, DES, 3DES, 256 bit AES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Applications: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: NS9360
• Other names: 602-1109

Ekahau Client configuration settings include:


Enable Ekahau Positioning Engine Client
Positioning Engine Client feature.
–
–
–
–
–
Device Descriptors:
–
–
Ekahau Server Settings: Configures how the Ekahau Positioning Engine Client
communicates with the server. Server Hostname: The hostname or IP address of the
Ekahau Positioning Engine. The maximum length of this option is 50 characters. The
default is 8548.
Connection Protocol: Specifies whether to use TCP or UDP as the network transport.
The default is TCP.
Server Port: The network port to communicate on. In the default Ekahau configuration,
port 8548 is used for TCP, and port 8549 for UDP.
Poll Rate: The time in seconds between each scan or wireless access points and
communication with the server. Once the Ekahau Client is enabled, every time the Digi
device scans the network, it is essentially disassociated with the access point (AP)
providing its network connectivity. In addition, during the time, or scanning interval, set
by the poll rate, it will not be receiving or transmitting wireless packets. This could lead
to packet loss. Set the poll rate as slow as acceptable in the application where the Digi
device is being used. The default is five seconds.
Password: A password to authenticate with the server. The maximum length of this
option is 50 characters. The default for Digi and the Ekahau Positioning Engine is
Llama.
Device ID: A numeric identifier for the Digi device, used internally by the Ekahau
Positioning Engine for device tracking over time. This identifier should be unique for
each Digi device being located on the network.
Device Name: A descriptive name to identify the Digi device to users. The maximum
length of this option is 50 characters.
™
: Enables or disables the Ekahau
C o n f i g u r e D i g i d e v i c e s
1 7 6