X4-A11-W-A Digi International, X4-A11-W-A Datasheet - Page 243

no-image

X4-A11-W-A

Manufacturer Part Number
X4-A11-W-A
Description
PORT XBEE 802.15.4 - WIFI802.11G
Manufacturer
Digi International
Series
ConnectPort™ X4r
Datasheets

Specifications of X4-A11-W-A

Function
Transceiver, Xbee, Gateway
Modulation Or Protocol
802.15.4 Zigbee
Frequency
2.4GHz
Interface
1 USB, 1 RS-232, 1 RJ-45
Sensitivity
-93dBm
Power - Output
15dBm
Data Rate - Maximum
54Mbps
Voltage - Supply
6 V ~ 30 V
Wireless Frequency
2.4 GHz
Interface Type
RS-232, Ethernet, SMA
Security
NAT, DES, 3DES, 256 bit AES
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Applications
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
NS9360
Other names
602-1109
Power LED
Status LED
Ethernet Link LED
Ethernet Activity
LED
Cellular Link LED
Cellular Activity
LEDs
Cellular Signal
Strength LEDs
XBee Link
LED/button
Green
Not illuminated
Solid red
1-1-1 blinking green
1-5-1 blinking green
Other blinking green
Solid green
Solid yellow
Blinking green
Solid yellow
Blinking green
Blue
Off
Solid green
Blinking green
Light Pattern
Color and
ConnectPort X8 LEDs and buttons
Power is applied.
No power.
Blinks during product initialization and factory reset, using the light patterns below.
This LED should never blink during normal operation. If it blinks constantly, contact
Digi Technical Support.
Hardware is initializing.
Firmware is initializing.
Device configuration has been restored to its factory defaults.
Contact Digi Technical Support.
Device is powered on and ready for operation.
Ethernet link is up.
Ethernet traffic is on the link.
Cellular link is up.
Cellular traffic is on the link.
Relative signal strength indicator (RSSI), shown as a number of LEDs.
 
 
 
Specific dB values for the signal can be found via the web interface; go to
Administration > System Information > Mobile . Under Mobile Connection, the
signal strength is displayed in bars and dBm. Or, from the command line. enter the
display mobile command.
Gateway is disabled.
XBee RF module in the gateway has started or joined an XBee network.
XBee RF module in the gateway has not started or joined an XBee network.
0: signal strength unknown or unacceptable
1: signal strength low/weak
5: signal strength high/excellent
Description
T r o u b l e s h o o t i n g
2 4 3

Related parts for X4-A11-W-A