X4-A11-W-A Digi International, X4-A11-W-A Datasheet - Page 99
X4-A11-W-A
Manufacturer Part Number
X4-A11-W-A
Description
PORT XBEE 802.15.4 - WIFI802.11G
Manufacturer
Digi International
Series
ConnectPort™ X4r
Specifications of X4-A11-W-A
Function
Transceiver, Xbee, Gateway
Modulation Or Protocol
802.15.4 Zigbee
Frequency
2.4GHz
Interface
1 USB, 1 RS-232, 1 RJ-45
Sensitivity
-93dBm
Power - Output
15dBm
Data Rate - Maximum
54Mbps
Voltage - Supply
6 V ~ 30 V
Wireless Frequency
2.4 GHz
Interface Type
RS-232, Ethernet, SMA
Security
NAT, DES, 3DES, 256 bit AES
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Applications
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
NS9360
Other names
602-1109
- Current page: 99 of 254
- Download datasheet (3Mb)
If the third-party router’s WAN interface is attached to the Digi device’s Ethernet port, and the Digi
device’s mobile interface receives the IP address 166.213.2.215, the router’s WAN port is assigned
the same IP address 166.213.2.215. If the router is receiving the IP address dynamically; the DNS
server addresses, subnet mask, and default gateway information will be filled in automatically. If
the router is configured manually; you need to obtain the DNS information from the mobile service
provider and enter that manually. The subnet mask is 255.255.255.0 and the default gateway is the
same as the mobile IP address with “.1” for the last octet. In other words: if the mobile IP address
is 166.213.2.215, the default gateway is 166.213.2.1.
IP pass-through’s effect on network access to Digi devices
When IP pass-through is enabled, the Digi device effectively disables all router and IP service
functionality. Services that are disabled are:
The Digi device is effectively transparent to all IP activity and network access by other devices,
with these exceptions:
NAT
Port Forwarding
VPN
DDNS updates
Socket Tunnel
Network Services configuration.
It can be accessed via the serial port for configuration using the command line interface.
It accepts TCP/IP connections for purposes of configuration by means of a “pinhole” on
the mobile interface.
It can be accessed by other devices on the local Ethernet segment via the default IP
address of 192.168.1.1.
C o n f i g u r e D i g i d e v i c e s
9 9
Related parts for X4-A11-W-A
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
CONNECTPORT X4 XBEE 802.15.4-ETH
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
PORT XBEE 802.15.4 - 2G GPRS
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
PORT X4 ZIGBEE TO ETHERNET
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
PORT X4 ZIGBEE TO WIFI
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
CONNECTPORT X4 2.4GHZ
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules CnnctPort X4 Rt Gtwy ZigBee S2C High Pwr
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
Zigbee / 802.15.4 Modules ConnectPort X4 Gtwy DigiMesh 900MHz
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
PORT XBEE ZNET 2.5 TO ETHERNET
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
XBEE ZNET 2.5 - WI-FI 802.11G
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
XBEE ZNET 2.5-ETH/CELL 2G GPRS
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules CnnctPort X4 IA Gtwy ZigBee S2C High Pwr
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
WiFi / 802.11 Modules CnnctPort X4 Rt Gtwy ZigBee S2C High Pwr
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
IC ARM MICROPROCESSOR 177BGA
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
DIGI CONNECT 4MB FLASH 8MB RAM
Manufacturer:
Digi International
Datasheet:
Part Number:
Description:
ME 8MB SDRAM 2MB FLASH SINGLE
Manufacturer:
Digi International
Datasheet: