X8-A11-E-A Digi International, X8-A11-E-A Datasheet - Page 121

• Manufacturer Part Number: X8-A11-E-A
• Description: CONNECTPORT X8 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X8r

Specifications of X8-A11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ45, DB-9, 2 USB
• Sensitivity: -93dBm
• Power - Output: 15dBm
• Data Rate - Maximum: 54Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232, Ethernet, USB
• Modulation: BPSK, CCK, DBPSK, DQPSK, QPSK
• Security: 256 bit AES, 3DES, DES, SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 3.1 W
• Antenna: 4 in Dipole with 2 ft Cable
• Operating Temperature Range: - 30 C to + 60 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1171

Short Message Service (SMS) settings
The following options configure the cellular Short Message Service (SMS) capabilities of the
mobile module of the Digi device.
Important Notes:



Global SMS settings




Currently, SMS is supported for Digi devices with GSM cellular modems only. To
determine whether the cellular modem in a Digi device supports SMS, Telnet to the
command line and enter the show smscell command. If an error message is returned
(error: show option not found), then SMS is not supported for that Digi device.
SMS is a feature that may be available as part of your mobile service agreement.
However, sending and receiving short messages (or “text messages”) may have
additional costs. Before using the SMS capabilities of your Digi device, verify with your
mobile service provider that your agreement includes SMS as part of your service plan.
Understand the costs of SMS before you enable the SMS features on this Digi device.
Please read "Supported Character Set" on page 125.
Enable cellular Short Message Service (SMS) capabilities: Enable SMS features on
this Digi device. When this option is enabled, the remaining SMS options may be
configured. This option is disabled (off) by default.
Send ACK reply via SMS when command is accepted: When a command message is
received via SMS, send an acknowledgement (ACK) message via SMS to the originator
of the command message, indicating that the command has been accepted and will be
processed. This option is disabled (off) by default.
Send NAK reply via SMS if password validation fails: When a command message is
received via SMS, and a required password is either missing or incorrect, send a
negative acknowledgement (NAK) message via SMS to the originator of the command
message, indicating that the command has been rejected due to password validation
failure. This option is disabled (off) by default.
Global SMS Command Password: When a command message is received via SMS,
and a global password is specified in these settings, that password must be provided by
the originator of the command message or the message will be rejected by the Digi
device. If a command-specific password is configured, that command-specific password
must be provided instead of this global command password. Specifically, a command-
specific password overrides the global password, and the global password is not
considered if a command-specific password is configured in the settings. This option is
disabled (no global password required) by default. To remove the password, simply
clear the password field on the settings page.
C o n f i g u r e D i g i d e v i c e s
1 2 1