X8-A11-E-A Digi International, X8-A11-E-A Datasheet - Page 136

no-image

X8-A11-E-A

Manufacturer Part Number
X8-A11-E-A
Description
CONNECTPORT X8 2.4GHZ
Manufacturer
Digi International
Series
ConnectPort™ X8r
Datasheets

Specifications of X8-A11-E-A

Function
Transceiver, Xbee, Gateway
Modulation Or Protocol
UDP/TCP, DHCP, SNMPv1
Frequency
2.4GHz
Applications
General Purpose
Interface
RJ45, DB-9, 2 USB
Sensitivity
-93dBm
Power - Output
15dBm
Data Rate - Maximum
54Mbps
Voltage - Supply
12VDC
Wireless Frequency
2.4 GHz
Interface Type
RS-232, Ethernet, USB
Modulation
BPSK, CCK, DBPSK, DQPSK, QPSK
Security
256 bit AES, 3DES, DES, SSL Tunnel
Operating Voltage
9 V to 30 V
Output Power
3.1 W
Antenna
4 in Dipole with 2 ft Cable
Operating Temperature Range
- 30 C to + 60 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
602-1171
Y value-Node type
API mode is a frame-based interface mode that extends the level to which a host application can
interact with the networking capabilities of the module. When in API mode, all data entering and
leaving the module is contained in frames that define operations or events within the module.
Gateways typically use XBee firmware for coordinator API mode. More information about API
mode is in the Product Manuals for the XBee RF modules.
AT mode is a state in which incoming serial characters are interpreted as XBee AT commands.
More information about AT mode is in the Product Manuals for the XBee RF modules.
XBee ZB and Smart Energy standard networks have all node types.
Other network types have standard nodes and adapters.
ZigBee nodes use different firmware for AT and API mode.
Standard nodes support both AT and API modes.
The gateway XBee module must be ZigBee type 1 or 3, or non-ZigBee type 0.
Remote nodes may be any node type.
Standard node, or Coordinator AT command mode
Coordinator API mode
Router AT mode
Router API mode
Router/End Device Sensor Adapter
End Device Power Harvester Adapter
Router/End Device Analog IO Adapter
Router/End Device Digital IO Adapter
End Device AT command mode
End Device API mode
Multiple node types in a zip file
Node type
0
1
2
3
4
5
6
7
8
9
x
C o n f i g u r e D i g i d e v i c e s
Y value
1 3 6

Related parts for X8-A11-E-A