X8-A11-E-A Digi International, X8-A11-E-A Datasheet - Page 159

• Manufacturer Part Number: X8-A11-E-A
• Description: CONNECTPORT X8 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X8r

Specifications of X8-A11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ45, DB-9, 2 USB
• Sensitivity: -93dBm
• Power - Output: 15dBm
• Data Rate - Maximum: 54Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232, Ethernet, USB
• Modulation: BPSK, CCK, DBPSK, DQPSK, QPSK
• Security: 256 bit AES, 3DES, DES, SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 3.1 W
• Antenna: 4 in Dipole with 2 ft Cable
• Operating Temperature Range: - 30 C to + 60 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1171

Digi Login Traps
MIB
Digi Structures of
Management (SMI)
MIB
Digi Connect
Mobile Traps MIB
Digi Connectware
Notifications MIB
Supported SNMP traps
Number
Indicates when users attempt to log into the device, and whether the
attempt was successful.
Data structures for managing hosts and gateways on a network.
A Digi enterprise MIB for sending alarms as SNMP traps.for mobile
devices.
This MIB may be required by some SNMP import facilities, as other
MIBs may refer to it.
SNMP traps can be enabled or disabled. Supported traps include:
Authentication failure
Login
Cold start
Link up
Alarms can be issued in the form of SNMP traps.
A large set of MIBs define these various trap types (unsolicited status
message from the device).
All products support MIBs for serial alarms / login traps/RFC 1215.
Products with the geofencing/GPS feature support MIBs for
geofencing.
Products with mobile/cellular capability support MIBs for mobile
alarms.
Description
http://ftp1.digi.com/support/utilities/
Digi Part number 40002339_x.mib
http://ftp1.digi.com/support/utilities/
Digi Part number 40002195_x.mib
http://ftp1.digi.com/support/utilities/
Digi Part number 40002594_x.mib
http://ftp1.digi.com/support/utilities/
Digi Part number 40002514_x.mib
In the web interface, traps are enabled/
disabled at Configuration > System >
SNMP >
Enable Simple Network
Management Protocol (SNMP) traps
Alarms are configured at
Configuration > Alarms >
Alarm Conditions > Alarm n >
Alarm Destinations > Send SNMP
trap to following destination when
alarm occurs
C o n f i g u r e D i g i d e v i c e s
Location
1 5 9