X8-A11-E-A Digi International, X8-A11-E-A Datasheet - Page 194

• Manufacturer Part Number: X8-A11-E-A
• Description: CONNECTPORT X8 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X8r

Specifications of X8-A11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ45, DB-9, 2 USB
• Sensitivity: -93dBm
• Power - Output: 15dBm
• Data Rate - Maximum: 54Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232, Ethernet, USB
• Modulation: BPSK, CCK, DBPSK, DQPSK, QPSK
• Security: 256 bit AES, 3DES, DES, SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 3.1 W
• Antenna: 4 in Dipole with 2 ft Cable
• Operating Temperature Range: - 30 C to + 60 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1171

Interface Table
Gateway
The current status of all available IP network interfaces. The table is displayed in order of the
interface priority configured in the Network Failover settings. For each network interface, the
following information is displayed:
The number shown above for each status value indicates the priority of that status, used by
failover in selecting the interface to use as the default gateway. Status priority 1 is the most
suitable for use, with lower priorities considered suitable if there are no interfaces at the
highest priority.
The interface list is maintained in the interface priority order configured in the Network
Failover settings. When any interface changes status, the interface list is examined for the
interface that has the highest status priority, nearest the start of the list. The highest priority
interface with a Responding status is used as the default gateway. If no interface is marked
Responding then the highest Up interface is used, etc.
The gateway IP address associated with the interface, or 0.0.0.0 if the interface does not have
an associated gateway. An interface with no gateway is not suitable for use as the default
gateway.
State: The Network Failover enabled state (On or Off) for this interface. The On state means
failover is monitoring this interface, and the Off state means failover is not using this
interface for failover purposes.
Tests: The number of Link Tests (0, 1 or 2) that are configured for this interface.
priority is 1, which is the first interface in the configured Failover Interface Priority
list.
and their meanings:
responding to the link tests. This interface is suitable for use as the default gateway.
determined by the link tests, or no link tests are configured. This interface may be
suitable for use as the default gateway.
is not currently responding to the link tests, and the number of consecutive test
failures has reached the threshold number configured in the Network Failover
settings. This interface may be suitable for use as the default gateway.
currently responding to the link tests. This interface is not suitable for use as the
default gateway.
interface is not suitable for use as the default gateway.
Priority: The priority of the interface used by Network Failover. The highest
Interface: The name of the network interface.
Status: The current failover status of this network interface. Possible status values
1 - Responding: The interface is Up and configured in the system. It is currently
2 - Up; The interface is Up and configured in the system. Its status has not been
3 - Not Responding: The interface is Up and configured in the system. However, it
4 - Down: The interface is Down or not configured in the system. However, it is not
5 - Unknown: The interface is Unknown (does not exist) in the system. This
M o n i t o r a n d m a n a g e D i g i d e v i c e s
1 9 4