X8-A11-E-A Digi International, X8-A11-E-A Datasheet - Page 221

• Manufacturer Part Number: X8-A11-E-A
• Description: CONNECTPORT X8 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X8r

Specifications of X8-A11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ45, DB-9, 2 USB
• Sensitivity: -93dBm
• Power - Output: 15dBm
• Data Rate - Maximum: 54Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232, Ethernet, USB
• Modulation: BPSK, CCK, DBPSK, DQPSK, QPSK
• Security: 256 bit AES, 3DES, DES, SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 3.1 W
• Antenna: 4 in Dipole with 2 ft Cable
• Operating Temperature Range: - 30 C to + 60 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1171

Administration from the command-line interface
Administrative tasks for Digi devices can also be performed from the command line. Here are
several device-administration tasks and the commands used to perform them. See the Digi Connect
Family Command Reference for more complete command descriptions.
Backup/restore a configuration from a
TFTP server on the network
Update firmware
Reset configuration to factory defaults
Display system information and statistics
Reboot the device
Enable/disable network services
Administrative task
backup
boot
Telnet to the Digi device's command line interface using a
telnet application or hyperterm.
If security is enabled for the Digi device, a login prompt is
displayed. The default username is “root” and the default
password is “dbps.” If these defaults do not work, contact the
system administrator who set up the device.
Issue the command:
revert
or
boot action=factory
info
boot
set service
#> boot load=tftp-server-ip:filename
where tftp-server-ip is the IP address of the TFTP server
that contains the firmware, and filename is the name of
the file to upload.
D i g i d e v i c e a d m i n i s t r a t i o n
Command
2 2 1