XT09-PKI-E Digi International/Maxstream, XT09-PKI-E Datasheet - Page 5

• Manufacturer Part Number: XT09-PKI-E
• Description: MODEM RF 900MHZ 1W ETHER
• Manufacturer: Digi International/Maxstream
• Series: XTend™r

Specifications of XT09-PKI-E

• Function: Transceiver, Modem
• Modulation Or Protocol: FHSS, FSK
• Frequency: 900MHz
• Interface: RJ-45 Ethernet
• Sensitivity: -110dBm
• Data Rate - Maximum: 10 kbps
• Voltage - Supply: 7 V ~ 28 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Power - Output: -
• Applications: -

9XTend‐PKG‐E™ Ethernet RF Modem – Product Manual v2.x4x [2007.01.04]
Table 1‐01. 9XTend‐PKG‐E Ethernet RF Modem Specifications
Table 1‐02. 9XTend‐PKG‐E Ethernet RF Modem Specifications ‐ Relative to user‐selected TX Power Output
* Divide by 2 for 18V supply (constant wattage from 7‐28V)
9XTend 900 MHz Ethernet RF Modem Specifications
Performance
Transmit Power Output
(software selectable using PL command)
Indoor/Urban Range
Outdoor
RF line-of-sight Range
Interface Data Rate
(software selectable using BD command)
RF Data Rate
Receiver Sensitivity
Power Requirements
Supply Voltage
Receive Current
Serial Port Sleep Power Down
Idle Currents
(9V supply
voltage)
Networking & Security
Frequency
Spread Spectrum
Modulation
Network Topologies Supported
Channel Capacity
Supported Network Protocols
Encryption
Physical Properties
RF Modem Board Size
Weight
Serial Connector
Operating Temperature
Antenna
Connector
Type
Impedance
Certifications (partial list)
FCC Part 15.247
Industry Canada (IC)
Power Requirements (TX currents relative to each TX Power Output option)
Transmit Power Output
Typical Transmit Current* (@115.2 Kbps)
9 VDC supply voltage
1.2. Specifications
16 sec cyclic sleep (SM=8)
8 sec cyclic sleep (SM=7)
4 sec cyclic sleep (SM=6)
2 sec cyclic sleep (SM=5)
1 sec cyclic sleep (SM=4)
The XTend-PKG-E RF Modem ships configured to provide immediate long range wireless links
between devices. The modem can be configured for additional functionality using standard AT and
binary commands [Refer to the Command Mode [p18] & RF Modem Configuration [p20] sections].
The built-in Ethernet interface makes RF data available to any TCP/IP network. Once connected to
a network, the XTend-PKG-E can be accessed through telnet; or, when used with the included Com
Port Redirector Software, it can be mapped to a com port and accessed as a serial device.
© 2007 MaxStream, Inc., Confidential & Proprietary ‐ All Rights Reserved
Peer-to-Peer (“Master/Slave” relationship not required), Point-to-Point, Point-to-Multipoint & Multidrop
270 mA
1 mW
Up to 40 miles (64 km) w/ high-gain antenna
Up to 14 miles (22 km) w/ dipole antenna
@9600 bps Throughput Data Rate
Up to 3000’ (900 m)
1200 – 230400 bps
ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP and SNMP
1mW - 1 Watt
256-bit AES Encryption – Refer to the KY Command to implement
10,000 bps
-110 dBm
270 mA
210 mA
212 mA
214 mA
218 mA
224 mA
7 - 28V
211 mA
290 mA
10 mW
2.750” x 5.500” x 1.125” (6.99cm x 13.97” x 2.86cm)
Half-wave dipole whip, 6.75” (17.15cm), 2.1 dBi gain
FHSS (Frequency Hopping Spread Spectrum)
10 hop sequences share 50 frequencies
RJ-45 Female Ethernet Connection
RPSMA (Reverse-polarity SMA)
FSK (Frequency Shift Keying)
-40 to 85º C (industrial)
50 ohms unbalanced
4214A-9XTEND
OUR-9XTEND
902-928 MHz
7.1 oz. (200g)
100 mW
380 mA
Up to 20 miles (32 km) w/ high-gain antenna
Up to 7 miles (11 km) w/ dipole antenna
@115200 bps Throughput Data Rate
500 mW
600 mA
Up to 1500’ (450 m)
1200 – 230400 bps
1mW - 1 Watt
125,000 bps
-100 dBm
270 mA
210 mA
210 mA
210 mA
212 mA
215 mA
7 - 28V
211 mA
830 mA
1 W
5