XT09-PKI-E-NA Digi International/Maxstream, XT09-PKI-E-NA Datasheet - Page 8

no-image

XT09-PKI-E-NA

Manufacturer Part Number
XT09-PKI-E-NA
Description
MODEM RF 900MHZ 1W ETHER INT
Manufacturer
Digi International/Maxstream
Series
XTend™r
Datasheet

Specifications of XT09-PKI-E-NA

Function
Transceiver, Modem
Modulation Or Protocol
FHSS, FSK
Frequency
900MHz
Interface
RJ-45 Ethernet
Sensitivity
-110dBm
Data Rate - Maximum
10 kbps
Voltage - Supply
7 V ~ 28 V
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Power - Output
-
Applications
-
9XTend‐PKG‐E™ Ethernet RF Modem – Product Manual v2.x4x [2007.01.04]
2.2. Com Port Communications
2.2.1. Install Software
Installation #1: X-CTU Software (version 4.8.0 or higher*)
Installation #2: Ethernet Com Port Redirector
The X-CTU and Com Port Redirector software facilitate communications through a PC com port.
Follow the instructions below to setup a com port for configuring and testing the RF modem.
Use the X-CTU software to configure the Ethernet RF Modem and PC com port. The software is
divided into four tabs:
Figure 2‐02. Tabs of the X‐CTU Software
* To verify X‐CTU version number, click on the icon located in the top‐left corner of the X‐CTU user interface and 
then select the ʺAbout X‐CTU…ʺ menu item.
To Install the X-CTU Software:
MaxStream provides com port redirection software that creates a com port in the operating sys-
tem that will forward serial data to the IP address of the Ethernet-connected RF modem. The
Ethernet RF Modem can then be accessed as though it were a serial device.
The Ethernet Com Port Redirector must be installed separately to enable the "Ethernet Com Ports"
sub-tab of the X-CTU "PC Settings" tab. If this software is not installed, the features under the
"Ethernet Com Ports" section are grayed and cannot be used.
The "Ethernet Com Ports" sub-tab enables user to perform functions such as the following:
To Install the Ethernet Com Port Redirector:
Double-click the "setup_X-CTU.exe" file then follow prompts of the installation screens. This file
is located on the MaxStream CD and under the 'Downloads' section of the following web page:
www.maxstream.net/helpdesk/download.php.
1.
2.
© 2007 MaxStream, Inc., Confidential & Proprietary ‐ All Rights Reserved 
• PC Settings tab - Setup PC serial com ports to interface with RF modem
• Range Test tab - Test RF modem's range under varying environments
• Terminal tab - Test serial communications and set/read RF modem parameters
• Modem Configuration tab - Set/read RF modem parameters
• Discover Ethernet RF Modems on a network
• Setup serial com ports for XTend-PKG-E Ethernet RF Modems
• Identify, assign and modify Ethernet RF Modem IP addresses
Double-click the "setup_ComPortRedirector.exe" file then follow prompts of the installation
screens. This file is located in the "software" folder of the MaxStream CD.
Re-boot the PC to complete installation.
     8

Related parts for XT09-PKI-E-NA