XT09-PKI-EA Digi International/Maxstream, XT09-PKI-EA Datasheet - Page 10

no-image

XT09-PKI-EA

Manufacturer Part Number
XT09-PKI-EA
Description
MODEM RF 900MHZ 1W ETHER W/ACC
Manufacturer
Digi International/Maxstream
Series
XTend™r
Datasheet

Specifications of XT09-PKI-EA

Function
Transceiver, Modem
Modulation Or Protocol
FHSS, FSK
Frequency
900MHz
Interface
RJ-45 Ethernet
Sensitivity
-110dBm
Data Rate - Maximum
10 kbps
Voltage - Supply
7 V ~ 28 V
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Power - Output
-
Applications
-
9XTend‐PKG‐E™ Ethernet RF Modem – Product Manual v2.x4x [2007.01.04]
2.2.3. Assign Static IP Address
2.2.4. Change Com Port Number
To assign a static IP address to the Ethernet RF Modem, follow the steps outlined below. A static IP
address may be necessary when:
Configure a static IP address on a local network:
Figure 2‐05. Properties & Change IP dialog boxes
During Com Port Redirector setup, one com port is automatically assigned. Additional com ports
are user-assigned. Use the following steps to manually change a com port number:
Change Ethernet RF Modem's Com Port Number:
1.
2.
3.
4.
5.
6.
7.
8.
9.
--> XTend-PKG-E Ethernet RF Modem re-boots and the new IP Address is saved.
1.
2.
3.
4.
5.
© 2007 MaxStream, Inc., Confidential & Proprietary ‐ All Rights Reserved 
• The Ethernet RF Modem and the host PC are on different subnets
• The Ethernet RF Modem IP address might be changed by a DHCP server
Install both the X-CTU Software and the Ethernet Com Port Redirector software [See "Com
Port Communications" section - p8]. Re-boot the PC if it has not been re-booted since the
installation of the Ethernet Com Port Redirector.
Launch the X-CTU Software and select the "PC Settings" tab; then select the "Ethernet Com
Ports" sub-tab [Figure 2-03]
--> After the Ethernet Com Port Redirector is installed (and PC is re-booted), a "Setup Com
Port" dialog box will appear the first time the "Ethernet Com Ports" sub-tab is selected. The
following steps are written under the assumption the sub-tab has already been selected at
least one time.
Select the "Discover modems" button to display which modems are on-line and which are
not; then click the 'OK' button of the "Discover Ethernet Modems" dialog box.
Click-on and highlight an Ethernet RF Modem from the 'Ethernet Com Ports' list.
Select the 'Com Port Properties' button [Figure 2-03].
Select the 'Modify' button of the "Properties" dialog box [Figure 2-05].
Type a new IP address; then select the 'OK' button [Figure 2-05].
Select the 'OK' button of the "Properties" dialog box.
Select the 'Apply' button that is under the 'Changes' section of the "Ethernet Com Ports"
sub-tab.
Once the Ethernet RF Modem is recognized and displayed under the "Ethernet Com Ports"
sub-tab, select the 'New Com Port' button. Follow the steps outlined in the "Ethernet RF
Modem Discovery" section [p9].
Type-in the IP Address of the Ethernet Modem and highlight a com port number; then
select the 'OK' button.
Select the 'Apply' button; then re-boot the PC if prompted to do so.
Go to the 'Ethernet Com Ports' sub-tab of the X-CTU Software's 'PC Settings' tab.
Highlight the old com port entry, select the 'Delete Com Port' button, then select the 'Apply'
button.
     10

Related parts for XT09-PKI-EA