X4-Z11-A01-A Digi International, X4-Z11-A01-A Datasheet - Page 246

no-image

X4-Z11-A01-A

Manufacturer Part Number
X4-Z11-A01-A
Description
CONNECTPORT X4 2.4GHZ
Manufacturer
Digi International
Series
ConnectPort™ X4r
Datasheets

Specifications of X4-Z11-A01-A

Function
Transceiver, Xbee, Gateway
Modulation Or Protocol
UDP/TCP, DHCP, SNMPv1
Frequency
2.4GHz
Applications
General Purpose
Interface
RJ45, DB-9, USB
Sensitivity
-93dBm
Power - Output
15dBm
Data Rate - Maximum
54Mbps
Voltage - Supply
12VDC
Wireless Frequency
2.4 GHz
Interface Type
RS-232, Ethernet, USB
Modulation
BPSK, CCK, DBPSK, DQPSK, QPSK
Security
256 bit AES, 3DES, DES, SSL Tunnel
Operating Voltage
6 V to 30 V
Output Power
1.5 W
Antenna
4 in Dipole
Operating Temperature Range
- 30 C to + 70 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
602-1172
configuration management
coordinator
CTS
device server
Digi Device Setup Wizard
DSR
DTR
Dynamic Host Configuration Protocol (DHCP)
EIA
Managing the files and settings that contain device configuration information. Configuration
management tasks include copying device configuration files to and from a remote host,
upgrading device firmware, and resetting the device configuration to factory defaults.
In XBee networks, a coordinator is node that has the unique function of forming a network. The
coordinator is responsible for establishing the operating channel and PAN ID for an entire
network. Once established, the coordinator can form a network by allowing routers and end
devices to join to it. Once the network is formed, the coordinator functions like a router (it can
participate in routing packets and be a source or destination for data packets). Characteristics of
coordinators include:
In the web interface, a coordinator is also referred to as a gateway device.
Clear to Send.
A one- or two-port intelligent network device that converts serial data into network data.
A wizard for configuring Digi devices that is available from the Digi Support site and on the
Software and Documentation CD shipped with each Digi device. The Digi Device Setup Wizard
is available in Microsoft Windows or UNIX platforms. It assigns an IP address for the device,
configures the device based on your description of the device environment, and determines
whether you need to install RealPort. Using the Digi Device Setup Wizard is the recommended
and preferred method for configuration.
Data Set Ready.
Data Terminal Ready.
An Internet protocol for automating the configuration of computers that use TCP/IP. DHCP can
be used to automatically assign IP addresses, to deliver TCP/IP stack configuration parameters
such as the subnet mask and default router, and to provide other configuration information.
See Electronics Industry Association.
One Coordinator per PAN
Establishes/Organizes PAN
Can route data packets to/from other nodes
Can be a data packet source and destination
Mains-powered
2 4 6

Related parts for X4-Z11-A01-A