X4-Z11-A01-A Digi International, X4-Z11-A01-A Datasheet - Page 87

no-image

X4-Z11-A01-A

Manufacturer Part Number
X4-Z11-A01-A
Description
CONNECTPORT X4 2.4GHZ
Manufacturer
Digi International
Series
ConnectPort™ X4r
Datasheets

Specifications of X4-Z11-A01-A

Function
Transceiver, Xbee, Gateway
Modulation Or Protocol
UDP/TCP, DHCP, SNMPv1
Frequency
2.4GHz
Applications
General Purpose
Interface
RJ45, DB-9, USB
Sensitivity
-93dBm
Power - Output
15dBm
Data Rate - Maximum
54Mbps
Voltage - Supply
12VDC
Wireless Frequency
2.4 GHz
Interface Type
RS-232, Ethernet, USB
Modulation
BPSK, CCK, DBPSK, DQPSK, QPSK
Security
256 bit AES, 3DES, DES, SSL Tunnel
Operating Voltage
6 V to 30 V
Output Power
1.5 W
Antenna
4 in Dipole
Operating Temperature Range
- 30 C to + 70 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
602-1172
requests during a ping link test. The ping tests sends a ping request. If no ping reply
is received before the Send Interval expires, another ping request is sent.
connect to the Primary Destination address.
which to establish a TCP connection. The Primary TCP Port is used as the port to
which the test connects at the Primary Destination. The destination must be a valid
IPv4 address. If the destination is left empty, no Primary Destination link test will be
attempted.
connect to the Secondary Destination address.
destination to which to establish a TCP connection. The Secondary TCP Port is used
as the port to which the test connects at the Secondary Destination. The destination
must be a valid IPv4 address. If the destination is left empty, no Secondary
Destination link test will be attempted.
TCP connection to be established or rejected by the destination host.
Send Interval (Ping Test): The time interval in seconds between sending ping
TCP Connection Test: Click on the radio button to select the TCP Connection Test as
the link test to use for this interface. The TCP Connection Test attempts to establish a
TCP connection to the configured destination IP address and port number. If a
connection is successfully established, or if the remote host actively rejects (resets) the
connection attempt, the link test has successfully demonstrated that the network
interface can be used to communicate with the specified destination. If a TCP
connection is successfully established, it is immediately closed.
Primary TCP Port (TCP Connection Test: The destination TCP port to use to
Primary Destination (TCP Connection Test): The primary, or first, destination to
Secondary TCP Port (TCP Connection Test): The destination TCP port to use to
Secondary Destination (TCP Connection Test): The secondary, or second,
Connection Timeout (TCP Connection Test): The time in seconds to wait for a
C o n f i g u r e D i g i d e v i c e s
8 7

Related parts for X4-Z11-A01-A