TDA5230 Infineon Technologies, TDA5230 Datasheet - Page 43

• Manufacturer Part Number: TDA5230
• Description: IC RECEIVER ASK/FSK 28-TSSOP
• Manufacturer: Infineon Technologies
• Type: Receiverr

Specifications of TDA5230

• Package / Case: 28-TSSOP
• Frequency: 433MHz ~ 450MHz, 865MHz ~ 868MHz
• Sensitivity: -111dBm
• Data Rate - Maximum: 20 kbps
• Modulation Or Protocol: ASK, FSK
• Applications: RKE, TPM, Security Systems
• Current - Receiving: 8mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Voltage - Supply: 3 V ~ 3.6 V, 4.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 105°C
• Operating Frequency: 870 MHz
• Operating Supply Voltage: 3.3 V, 5 V
• Maximum Operating Temperature: + 105 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Memory Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: SP000076520; TDA5230; TDA5230INTR

CMC0:
ADDR:
2.4.5.5
In Self Polling Mode TDA523x autonomously polls for incoming RF wake up data
streams. There is no processing load on the host microcontroller. When a wake up
criterion has been found, the mode is changed to Run Mode Self Polling for automatic
verification of TSI, MIDs and transfer of data to the FIFO.
Self Polling Mode is entered by setting the register bit MSEL to 1.
Configuration changes are allowed only by switching to SLEEP mode, and returning
after reconfiguration.
The Polling Timer Unit controls the timing for scanning (On Time) and sleeping (Off
Time). Two independent configuration sets (A and B) are automatically switched, thus
enabling scanning from different transmit sources. Additionally, within each configuration
as many as 3 different frequency channels may be scanned to allow multi-channel
applications.
See also
The Wake Up Generation Unit identifies whether an incoming data pattern matches
with the configurable wake up criterion.
After receiving the wake up pattern, modulation can be switched.
See also
Up Generation
Data Sheet
Bit R/W Description
1
0
W
W
0x02
Chip Mode Control Register 0
Chapter 2.4.5.6 Automatic Modulation Switching
Chapter 2.4.6 Polling Timer
Self Polling Mode
SLRXEN: Slave Receiver enable
This Bit is only used in Operating Mode Run Mode Slave / SLEEP Mode
0: Receiver is in SLEEP Mode
1: Receiver is in Run Mode Slave
MSEL: Operating Mode
0: Run Mode Slave / SLEEP Mode
1: Self Polling Mode
Unit.
Unit.
39
and
Functional Description
Reset Value: 0x40
Chapter 2.4.12 Wake
Version 4.0, 2007-06-01
TDA523x