CYWUSB6934-48LFXC Cypress Semiconductor Corp, CYWUSB6934-48LFXC Datasheet - Page 18

• Manufacturer Part Number: CYWUSB6934-48LFXC
• Description: IC USB WIRELESS 2.4GHZ 48VQFN
• Manufacturer: Cypress Semiconductor Corp
• Type: Transceiverr

Specifications of CYWUSB6934-48LFXC

• Package / Case: 48-VQFN Exposed Pad, 48-HVQFN, 48-SQFN, 48-DHVQFN
• Frequency: 2.4GHz
• Data Rate - Maximum: 62.5kbps
• Modulation Or Protocol: DSSS, GFSK
• Applications: HID, PC, Peripheral Gaming Devices
• Power - Output: 0dBm
• Sensitivity: -90dBm
• Voltage - Supply: 2.7 V ~ 3.6 V
• Current - Receiving: 57.7mA
• Current - Transmitting: 69.1mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: 0°C ~ 70°C
• Operating Frequency: 2483 MHz
• Operating Supply Voltage: 3 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 428-1624

Table 22. Wake Status
Table 23. Analog Control
Document 38-16007 Rev. *J
7:1
0
7
6
5
4:3
2
1
0
Bit
Bit
Reserved
Reserved
Reg Write Control Enables write access to Reg 0x2E and Reg 0x2F.
MID Read Enable The MID Read Enable bit must be set to read the contents of the Manufacturing ID register (Reg 0x3C-0x3F).
Reserved
PA Output Enable The Power Amplifier Output Enable bit is used to enable the PACTL pin for control of an external power
PA Invert
Reset
Reserved
Wakeup Status Wakeup status.
7
7
Addr: 0x1D
Addr: 0x20
Name
Name
Reg Write
Control
These bits are reserved. This register is read-only.
0 = Wake interrupt not pending
1 = Wake interrupt pending
This IRQ will assert when a wakeup condition occurs. This bit is cleared by reading the Wake Status register
(Reg 0x1D). This register is read-only.
6
6
This bit is reserved and should be written with zero.
1 = Enables write access to Reg 0x2E and Reg 0x2F
0 = Reg 0x2E and Reg 0x2F are read-only
Enabling the Manufacturing ID register (Reg 0x3C-0x3F) consumes power. This bit should only be set when
reading the contents of the Manufacturing ID register (Reg 0x3C-0x3F).
1 = Enables read of MID registers
0 = Disables read of MID registers
These bits are reserved and should be written with zeroes.
amplifier.
1 = PA Control Output Enabled on PACTL pin
0 = PA Control Output Disabled on PACTL pin
The Power Amplifier Invert bit is used to specify the polarity of the PACTL signal when the PA Output Enable
bit is set high. PA Output Enable and PA Invert cannot be simultaneously changed.
1 = PACTL active low
0 = PACTL active high
The Reset bit is used to generate a self-clearing device reset.
1 = Device Reset. All registers are restored to their default values.
0 = No Device Reset.
MID Read
Enable
5
5
Reserved
Reserved
REG_ANALOG_CTL
REG_WAKE_STAT
4
4
Reserved
Description
Description
3
3
PA Output
Enable
2
2
PA Invert
1
1
CYWUSB6934
CYWUSB6932
Default: 0x01
Default: 0x00
Wakeup Status
Page 18 of 33
Reset
0
0
[+] Feedback