OPB828C TT Electronics/Optek Technology, OPB828C Datasheet

no-image

OPB828C

Manufacturer Part Number
OPB828C
Description
SENS OPTO SLOT 3.18MM TRANS THRU
Manufacturer
TT Electronics/Optek Technology
Type
Unamplifiedr
Datasheet

Specifications of OPB828C

Sensing Distance
0.125" (3.18mm)
Sensing Method
Transmissive
Output Configuration
Phototransistor
Current - Dc Forward (if)
50mA
Current - Collector (ic) (max)
30mA
Voltage - Collector Emitter Breakdown (max)
30V
Mounting Type
Through Hole
Package / Case
PCB Mount
Operating Temperature
-40°C ~ 85°C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Response Time
-
Slotted Optical Switch
OPB827, OPB828, OPB829Z Series
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
Features:
Description:
Each OPB827, OPB828 and OPB829 device consists of an infrared emitting diode (LED, 890 nm center
wavelength) and a NPN silicon phototransistor, mounted on opposite sides of a 0.125” (3.18 mm) wide slot in a
low-cost black plastic housing. A variety of aperture sizes are offered (see chart below). The OPB927 and
OPB828 are designed for PCBoard mounting with a minimum lead length of 0.35” (8.9 mm) while the OPB829Z
(wire version) has 24-inch 26 AWG wire leads. Phototransistor switching occurs when an opaque object passes
through the slot.
The OPB827 is offered with 0.305” (7.75 mm) and the OPB828 is offered with 0.220” (5.59 mm) lead spacing for
PCBoard mounting. The OPB829Z has 24” (61 cm) 26 AWG wire leads for remote mounting.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
0.125” (3.18 mm) wide, 0.215” (5.46 mm) deep slot
0.305” (7.75 mm) lead spacing (OPB827)
0.220” (5.59 mm) lead spacing (OPB828)
24-inch 26 AWG wire leads (OPB829)
Inexpensive plastic housing
Non-contact object sensing
Assembly line automation
Machine automation
Equipment safety
Machine safety
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Part Number
OPB829AZ
OPB829BZ
OPB829CZ
OPB829DZ
OPB827A
OPB827B
OPB827C
OPB827D
OPB828A
OPB828B
OPB828C
OPB828D
0.120" / 0.315”
0.120" / 0.315”
0.125” / 0.315”
Slot Width/
Depth
Ordering Information
IR Transmissive
IR Transmissive
IR Transmissive
Housing
Opaque
Opaque
Opaque
OPB827
OPB828
Product Photo Here
Vibra-Tite evaporates fast without causing structural
Applies to: OPB360, OPB370, OPB380, OPB390
Emitter/Sensor
ND Industries’ Vibra-Tite for thread-locking.
and OPB860, OPB870, OPB880, OPB890.
To avoid stress cracking, we suggest using
None / 0.01"
None / 0.06"
None / 0.01"
None / 0.01"
None / 0.06"
None / 0.01"
None / 0.01"
None / 0.06"
None / 0.01"
Aperture
failure in OPTEK’s molded plastics.
CONTAINS POLYSULFONE
None
None
None
OPB829Z
24" / 26 AWG Wire
Length / Spacing
0.425" / 0.300"
0.425" / 0.220"
Wire Lead
Issue A.2
Page 1 of 5
09/06

Related parts for OPB828C

OPB828C Summary of contents

Page 1

... Slot Width/ Part Number Depth OPB827A IR Transmissive OPB827B 0.120" / 0.315” OPB827C OPB827D OPB828A IR Transmissive OPB828B 0.120" / 0.315” OPB828C OPB828D OPB829AZ IR Transmissive OPB829BZ 0.125” / 0.315” OPB829CZ OPB829DZ FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPB827 OPB828 Product Photo Here OPB829Z ...

Page 2

Slotted Optical Switch OPB827, OPB828, OPB829Z Series OPB827 and OPB828 Series Color/Pin # Black-2 Red-1 OPB827 = 0.305” OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. ...

Page 3

Slotted Optical Switch OPB827, OPB828, OPB829Z Series Absolute Maximum Ratings Storage and Operating Temperature OPB827, OPB828 OPB829Z Lead Soldering Temperature (1/16 inch [1.6 mm] from case for 5 seconds with soldering iron) Input Diode Forward DC Current Peak Forward Current ...

Page 4

Slotted Optical Switch OPB827, OPB828, OPB829Z Series OPB827, OPB828, OPB829 Series - Devices A and C OPB827 thru OPB829 ( Flag Next to Emitter 1.20 1.00 0.80 0.60 0.40 Right to Left Left to Right 0.20 Top to ...

Page 5

Slotted Optical Switch OPB827, OPB828, OPB829Z Series OPB827, OPB828, OPB829 Series - Devices B and D OPB827 thru OPB829 ( Flag Next to Emitter 1.20 1.00 0.80 0.60 0.40 Right to Left 0.20 Left to Right Top to ...

Related keywords