SX100GD2 Honeywell Sensing and Control, SX100GD2 Datasheet

SENSOR HI-IMP 100PSIG DIP PKG

SX100GD2

Manufacturer Part Number
SX100GD2
Description
SENSOR HI-IMP 100PSIG DIP PKG
Manufacturer
Honeywell Sensing and Control
Series
SXr
Datasheets

Specifications of SX100GD2

Pressure Type
Gauge
Operating Pressure
100 PSI
Port Size
Male, 0.105" (2.67mm) Tube, Dual
Output
0 ~ 150mV
Voltage - Supply
12V
Operating Temperature
-40°C ~ 85°C
Package / Case
DIP
Sensor Output
Voltage
External Depth
13.84mm
Voltage Rating
12V
Port Style
Straight
Pressure Measurement Type
Gage
Operating Pressure Range
0-100 Psi
Output Type
Voltage
Operating Pressure Max
100psi
Operating Pressure Min
0psi
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
287-1075
Silicon Pressure Sensors
SX 0 psi to 1 psi to 0 psi to 150 psi
FEATURES
• Low Cost
• High-Impedance Bridge
• Absolute and
• Differential (Gauge)
• Low Noise
• Low Power Consumption
TYPICAL APPLICATIONS
• Medical
• Instrumentation
• Barometric
• Measurement
• Pneumatic Controls
• Battery Powered
EQUIVALENT CIRCUITS
Button, Nipple and N Packages
DIP Packages
PERSONAL INJURY
DO NOT USE these products
as safety or emergency stop
devices or in any other
application where failure of
the product could result in
personal injury.
Failure to comply with
these instructions could
result in death or serious
injury.
Sensing and Control
for Battery Power
Equipment
WARNING
GENERAL DESCRIPTION
The SX Series pressure sensors provide the lowest cost components for
measuring pressures up to 150 psi. These sensors are designed for use with
non-corrosive, non-ionic media, such as air and dry gases. Convenient
pressure ranges are available to measure differential, gauge, and absolute
pressures from 0 psi to 1 psi (SX01) up to 0 psi to 150 psi (SX150).
The Absolute (A) devices have an internal vacuum reference and an output
voltage proportional to absolute pressure. The differential (D) devices allow
application of pressure to either side of the diaphragm and can be used for
gauge or differential pressure measurements.
This product is packaged in either the standard low cost chip carrier “button”
package, a plastic ported “N” package, or a DIP package. All packages are
designed for applications where the sensing element is integral to the OEM
equipment. These packages can be o-ring sealed, epoxied, and/or clamped
onto a pressure fitting. A closed-bridge four pin SIP configuration is provided
for electrical connection to the “Button” or “N” Package. The DIP Package
mounts on a PC board like a standard IC with through-hole pins. This
extremely small size package enables the use of multiple sensors in
applications with limited space.
MISUSE OF DOCUMENTATION
Failure to comply with these instructions could result in death or
serious injury.
WARNING
The information presented in this product sheet is for reference
only. Do not use this document as a product installation guide.
Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product.
SX Series

Related parts for SX100GD2

SX100GD2 Summary of contents

Page 1

... Convenient pressure ranges are available to measure differential, gauge, and absolute pressures from 0 psi to 1 psi (SX01 psi to 150 psi (SX150). The Absolute (A) devices have an internal vacuum reference and an output voltage proportional to absolute pressure. The differential (D) devices allow ...

Page 2

... Note 7: Response time for a 0 psi to Full-Scale Span pressure step change, 10% to 90% rise time. Note 8: Maximum difference in output at any pressure within the operating pressure range and the temperature range within 0 ° °C [32 °F to 158 °F] after: a) 100 temperature cycles, 0 °C and 70 °C [32 °F to 158 ° million pressure cycles, 0 psi to full-scale span ...

Page 3

... SX01GD2, SX01DD4 SX05DP1 SX05DN SX05GD2, SX05DD4 SX15AP1 SX15AN SX15AD2, SX15AD4 SX30AP1 SX30AN SX30AD2, SX30AD4 – SX100AN SX100AD2, SX100AD4 – SX150AN – SX25DP1 SX15DN SX15GD2, SX15DD4 SX30DP1 SX30DN SX30GD2, SX30DD4 – SX100DN SX100GD2, SX100DD4 – – SX Series – Honeywell • Sensing and Control 3 ...

Page 4

... Silicon Pressure Sensors SX 0 psi to 1 psi to 0 psi to 150 psi Nipple Package N Housing Package 4 Honeywell • Sensing and Control SX Series ...

Page 5

... Silicon Pressure Sensors SX 0 psi to 1 psi to 0 psi to 150 psi D2 DIP Package DD4 DIP Package AD4 DIP Package SX Series Honeywell • Sensing and Control 5 ...

Page 6

... Silicon Pressure Sensors SX 0 psi to 1 psi to 0 psi to 150 psi WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’ ...

Related keywords