KP0215ASAKG03RGB-1SJB NKK Switches, KP0215ASAKG03RGB-1SJB Datasheet - Page 9

• Manufacturer Part Number: KP0215ASAKG03RGB-1SJB
• Description: SW PB SPST TACT AUD RED/GRN/BL
• Manufacturer: NKK Switches
• Series: KPr
• Type: Illuminatedr

Specifications of KP0215ASAKG03RGB-1SJB

• New! Us2012 Catalog Page: KP_LP01 Series
• Circuit: SPST-NO
• Switch Function: Off-Mom
• Contact Rating @ Voltage: 0.1A @ 12VDC
• Actuator Type: Square Button
• Illumination Type, Color: LED, Red/Green/Blue
• Illumination Voltage (nominal): 2.0, 3.3, 3.4 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Contact Form: SPST
• Contact Rating: 100 mAmps at 12 VoltsDC
• Actuator: Plunger, with Cap
• Cap Color: Clear, White Diffuser
• Supply Voltage: 12 VoltsDC
• Mounting Style: Through Hole
• Terminal Seal: Epoxy
• Contact Plating: Gold
• Contact Material: Copper Alloy
• Illumination: Illuminated
• Illumination Color: Red, Green, Blue
• Flammability Rating: UL 94 V-0
• Body Shape: Square
• Dielectric Strength: 1500 Volts
• Features: Complete switch solution for all broadcast panel needs; custom LED's; tactile, audible actuation; 12 mm square sculptured cap
• Housing Material: Polybutylene Terephthalate, Glass Fiber Reinforced
• Insulation Resistance: 100 MOhms
• Led Supply Voltage: 2 Volts, 3.3 Volts, 3.4 Volts
• Mounting Angle: Vertical
• Operating Force: 1.6 N
• Water / Moisture Rating: Non Water Resistant
• Ip Rating: Non Water Resistant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 360-2468

D
Series KP
D44
SENSITIVE DEVICES
ELECTROSTATIC
ATTENTION
cap assembly is released from the plunger, the lens and diffuser can
be separated.
the step on the diffuser.
plunger are designed with tabs and notches to assure proper
orientation of the cap on the switch.
Hold the switch tightly without touching the terminals. Firmly
press the cap onto the plunger by applying pressure from one
side to the other until both are snapped together.
Holding the switch tightly, pull the cap off the switch. Once the
Pry up the lens with fingernail or flat tip screwdriver inserted at
As shown in the accompanying illustration, the cap and
After aligning notches with tabs, join the lens and diffuser.
ASSEMBLY INSTRUCTIONS FOR SQUARE CAPS
Removal of Cap Assembly & Separation of Lens & Diffuser
Installation or Replacement of Cap
www.nkk.com
Cap Orientation
Miniature Audio/Video Pushbuttons
Notch
Tab
Step
Plunger
Notches
Cap
Assembly
Plunger
Switch