LW3129-0100-A

Manufacturer Part NumberLW3129-0100-A
DescriptionSW ROCKER PWR DPDT WH CAP SNAPIN
ManufacturerNKK Switches
SeriesLW
TypeRocker
LW3129-0100-A datasheets
 

Specifications of LW3129-0100-A

CircuitDPDTSwitch FunctionOn-Off-Mom
Contact Rating @ Voltage10A @ 125VACIlluminationNon-Illuminated
Mounting TypePanel Mount, Snap-InTermination StyleSolder Lug
Panel Cutout Dimensions32.00mm x 19.80mmActuator TypeRectangle
ApplicationFor various power switching applicationBrand/seriesLW Series
Contact FormDPDTCurrent, Rating10/6 AAC/ADC
Dielectric Strength1500 VACElectrical Life10000 Operations (Min.)
Material, BodySteel (Housing)Material, ContactSilver Clad Copper (Movable), Copper (Stationary)
Mechanical Life30000 Operations (Min.)Mounting Hole Size1.26"L×0.78"W
Number Of Poles2Number Of Positions2
OperationOn-None-(On)Resistance, Contact10 Milliohms (Max.)
Resistance, Insulation200 Megohms (Min.) @ 500 VDCSpecial FeaturesPower Rated
StandardsUL RecognizedTemperature, Operating, Maximum+50 °C
Temperature, Operating, Minimum-20 °CTerminationSolder
Voltage, Rating250/30 VAC/VDCPole Throw ConfigurationDPDT
Switch ConfigurationON OFF ONActuator StyleRocker
Current Rating (max)10AIllumination TypeNot Required
Ac Voltage Rating (max)250VVACDc Voltage Rating (max)30VVDC
Contact MaterialSilver Clad CopperContact PlatingSilver
Housing MaterialMelamine/SteelProduct Height (mm)37.1mm
Product Depth (mm)24mmProduct Length (mm)41mm
Operating Temp Range-20C to 50CMounting StylePanel
Terminal TypeSolder LugLead Free Status / RoHS StatusLead free / RoHS Compliant
Illumination Type, Color-Illumination Voltage (nominal)-
Other namesLW3129-0100-A-RO
LW3129-0100-A-RO
  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
Page 1/5

Download datasheet (433Kb)Embed
Next
Series LW
General
Specifications
B
Electrical Capacity
Resistive Load:
Inductive Load:
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Angle of Throw:
Materials & Finishes
Housing:
Movable Contacts:
Stationary Contacts:
Base:
Common Terminal:
End Terminals:
Lamp Terminals:
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
Installation
Cap Installation Force:
SolderingTime & Temperature:
Standards & Certifications
UL:
B56
10A @ 125V AC, 6A @ 250V AC, or 6A @ 30V DC
5A @ 125V AC (P. F. @ .60)
10 milliohms maximum
200 megohms minimum @ 500V DC
1,500V AC minimum for 1 minute minimum
30,000 operations minimum
10,000 operations minimum
11.77N for maintained & 17.65N for momentary
34°
Steel with chrome plating
Silver clad copper with silver plating
Copper with silver plating
Melamine
Copper with silver plating
Brass with silver plating
Phosphor bronze with nickel plating
–20°C through +50°C (–4°F through +122°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
) acceleration (tested in 3 right angled directions, with 3 shocks in each direction)
2
19.61N (4.41 lbf)
Manual Soldering: See Profile A in Supplement section.
File No. E44145
All models recognized at 10A @ 125V AC & 6A @ 250V AC
Add “/U” to end of part number to order UL mark on switch.
Add “/CUL” to end of part number to order cULus mark on switch
(equivalent to CSA certification).
www.nkk.com
Power-Rated Snap-in Rockers

LW3129-0100-A Summary of contents

  • Page 1

    ... Manual Soldering: See Profile A in Supplement section. File No. E44145 All models recognized at 10A @ 125V AC & 250V AC Add “/U” to end of part number to order UL mark on switch. Add “/CUL” to end of part number to order cULus mark on switch (equivalent to CSA certification). www.nkk.com Power-Rated Snap-in Rockers ...

  • Page 2

    ... Power-Rated Snap-in Rockers Distinctive Characteristics Each half of the rocker face is distinctly illuminated due to partitioned rocker construction and dual lamps. Numerous lighting effects achievable by using white or clear rocker with colored filters or lamp covers, plus using different colors on each side of rocker. Snap-in mounting allows fast, easy installation of switch into panel ...

  • Page 3

    ... No Cover/Filter Lamp Cover C Red D Amber F Green Filter B White C Red D Amber E Yellow F Green G Blue 18-volt Incandescent Lamp Black Bezel www.nkk.com Power-Rated Snap-in Rockers Bezel No No Bezel Code A Black B White C Red D Amber E Yellow F Green G Blue H Gray Lamp Cover/ Filter Colors For Down Position ...

  • Page 4

    ... OFF ON OFF LW3129 Electrical specifications are determined at a basic temperature of 25°C. Lamp circuit is independent of switch operation. For dimension drawing of lamps see Accessories & Hardware section. For neon, if the source voltage is greater than rated voltage, a ballast resistor is required. The ballast resistor calculation and more lamp detail are shown in the Supplement section. Neon not for use with green lamp cover or blue and green filters. Incandescent & ...

  • Page 5

    ... Actuator in UP position OPTIONAL ACCESSORY LEGENDS Inscriptions can be placed on the rocker or filter. www.nkk.com Power-Rated Snap-in Rockers (28.8) 1.134 H (2.6) .102 Gray (24.0) .945 Material: Polycarbonate (1.2) Dia Typ .047 L1 (0 ...