WLD3-TS Omron, WLD3-TS Datasheet - Page 42

• Manufacturer Part Number: WLD3-TS
• Description: SWTCH LMT DPST 6A TOP BALL PLNGR
• Manufacturer: Omron
• Series: WLr

Specifications of WLD3-TS

• Circuit: SPDT-DM/DB
• Switch Function: On-Mom
• Contact Rating @ Voltage: 10A @ 125VAC
• Actuator Type: Round (Pin Plunger)
• Mounting Type: Chassis Mount
• Termination Style: Screw Terminal
• Operating Force: 2720gf
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: WLD3TS

Operation of Fork Lever Locks
The fork lever lock is configured so that the dog pushes the lever to reverse the output and this reversed state is maintained even after
the dog continues on. If the dog then pushes the lever from the opposite direction, the lever will return to its original position.
Example
Installing the Roller on the Inside
By installing the roller lever in the op-
posite direction, the roller can be in-
stalled on the inside. (Set so that
operation can be completed within a
180° level range.)
Selecting the Roller Position
There are four types of fork lever lock
for use depending on the roller posi-
tion.
Adjusting the Length of the Rod or
Lever
The length of the rod or lever can be
adjusted by loosening the Allen-head
bolt.
NC terminal: ON
Item
NO terminal: ON
Roller Levers:
WLCA@, WL01CA@, WLH@, WL-
CA@-2, WL01CA@-2, WLMCA2@,
WLMH2@, WLMG2@, WLMGCA2@,
WLG@, except for the adjustable roller
levers.
Fork Lever Locks:
WLCA32-4@, WL01CA32-4@
Fork Lever Locks:
WLCA32-4@, WL01CA32-4@
Adjustable Roller Levers:
WLCA12, WL01CA12 etc.
Adjustable Rod Levers:
WLCL, WL01CL, etc.
Applicable models and Actuators
NO terminal: ON
Note: An explanation of the operation of fork lever locks is provided after
WLCA12 etc.
Loosen this
Allen-head bolt
and adjust the
length of the
lever.
Loosen the
Allen-head bolt.
this table.
WLCA32-41
WLCA32-42
Adjustment range radius:
25 to 89 mm
Details
WLCA32-43
WLCA32-44
WL/WLM
Loosen this
Allen-head bolt
and adjust the
length of the rod.
42