M2012ES1W01 NKK Switches, M2012ES1W01 Datasheet - Page 2

• Manufacturer Part Number: M2012ES1W01
• Description: SWITCH TOGGLE SPDT 6A THREAD SLD
• Manufacturer: NKK Switches
• Series: Mr
• Type: Toggler

Specifications of M2012ES1W01

• Circuit: SPDT
• Switch Function: On-On
• Contact Rating @ Voltage: 6A @ 125VAC
• Actuator Type: Flatted
• Actuator Length: 11.40mm
• Illumination: Non-Illuminated
• Mounting Type: Panel Mount
• Termination Style: Solder Lug
• Bushing Thread: 1/4-40
• Contact Form: SPDT
• Contact Current Rating: 6 Amps at 125 Volts
• Mounting Style: Panel
• Terminal Seal: Epoxy
• Contact Plating: Silver
• Actuator: Lever, Flat
• Voltage Rating Ac: 125 Volts
• Contact Rating: 6 Amps at 125 Volts
• Body Style: Miniature
• Current, Rating: 6/4 AAC/ADC
• Dielectric Strength: 1500 VAC
• Mounting Hole Size: 0.256 "
• Number Of Poles: 1
• Number Of Positions: 2
• Operation: On-None-On
• Termination: Solder
• Voltage, Rating: 250/30 VAC/VDC
• Pole Throw Configuration: SPDT
• Switch Configuration: ON None ON
• Actuator Style: Small Flat Toggle
• Current Rating (max): 6A
• Ac Voltage Rating (max): 250VVAC
• Dc Voltage Rating (max): 30VVDC
• Contact Material: Silver Alloy
• Mechanical Life: 50000
• Operating Temperature Min Deg. C: -30C
• Operating Temperature Max Deg. C: 85C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 360-1043; 360-1043; 360-1784; M2012ES1W01-RO

General Specifications
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
Processing
Standards & Certifications
NKK Switches
R
Logic/Power Level (code A):
Nominal Operating Force:
Flammability Standards:
Operating Temp Range:
Power Level (code W):
Insulation Resistance:
Logic Level (code G):
Stationary Contacts:
Movable Contactor:
Contact Resistance:
Dielectric Strength:
Movable Contacts:
Mounting Torque:
C-UL Recognized:
Mechanical Life:
Angle of Throw:
UL Recognized:
CSA Certified:
Electrical Life:
Soldering:
Terminals:
Vibration:
Humidity:
Cleaning:
Bushing:
Sealing:
Toggle:
Shock:
Case:
6A @ 125V AC & 3A @ 250V AC
4A @ 30V DC for On-None-On & On-None-Off; 3A @ 30V DC for all other circuits
0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Combines W & G ratings
Note: Find additional explanation of dual rating & operating range in Supplement section.
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts and case for 1 minute minimum
100,000 operations minimum; 50,000 operations minimum for flat, locking, & splashproof devices
25,000 operations minimum for silver; 50,000 operations minimum for gold;
50,000 operations minimum for silver at 3A @ 125V AC
3.92N for Single Pole; 4.41N for Double Pole; 6.86N for Three Pole; 7.85N for Four Pole
25°
Brass with chrome plating
Brass with nickel plating
Diallyl phthalate resin (UL94V–0)
Phosphor bronze with silver or gold plating
Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A)
Silver with silver plating (code W); copper or brass with gold plating (code G);
or silver with gold plating (code A)
Copper or brass with silver plating; or copper or brass with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
Panel seal bushing options B3 & D3 meet IP67 of IEC60529 Standards
3.0Nm (26.55 lb
1.5Nm (13 lb
Wave Soldering (PC version) for Gold: See Profile A in Supplement section.
Manual Soldering for Gold: See Profile A in Supplement section.
Wave Soldering (PC version) for Silver: See Profile B in Supplement section.
Manual Soldering for Silver: See Profile B in Supplement section.
Note: Lever must be in OFF (center) position while soldering.
These devices are not process sealed. Hand clean locally using alcohol based solution.
UL94V–0 for case
All models recognized at 6A @ 125V AC, 3A @ 250V AC or 0.4VA maximum @ 28V DC maximum;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch.
All models recognized at 6A @ 125V AC, 3A @ 250V AC or 0.4VA maximum @ 28V DC maximum;
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.
All models recognized at 6A @ 125V AC or 3A @ 250V AC or 0.4VA maximum @ 28V maximum;
CSA File No. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.
•
2
in) double nut & 0.7Nm (6 lb
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
•
in) double nut for large bushing;
Miniature Toggles
•
in) single nut for all other bushings
Support Bracket:
Frame:
Stainless steel
Steel with tin plating
Series M
7