M2112TCFW01 NKK Switches, M2112TCFW01 Datasheet - Page 7

• Manufacturer Part Number: M2112TCFW01
• Description: SW TOGGLE SPDT R/G ILL SILV SLD
• Manufacturer: NKK Switches
• Series: M2100r
• Type: Toggler

Specifications of M2112TCFW01

• Circuit: SPDT
• Switch Function: On-On
• Contact Rating @ Voltage: 6A @ 125VAC
• Actuator Type: Standard Round
• Actuator Length: 14.70mm
• Illumination: Illuminated
• Mounting Type: Panel Mount
• Termination Style: Solder Lug
• Bushing Thread: 1/4-40
• Contact Form: SPDT
• Current, Rating: 6/3 AAC/ADC
• Dielectric Strength: 1500 VAC
• Mounting Hole Size: 0.087 "
• Number Of Poles: 1
• Number Of Positions: 2
• Operation: On-None-On
• Special Features: Illuminated
• Termination: Solder
• Voltage, Rating: 250/30 VAC/VDC
• Pole Throw Configuration: SPDT
• Switch Configuration: ON None ON
• Actuator Style: Toggle
• Current Rating (max): 6A
• Ac Voltage Rating (max): 250VVAC
• Dc Voltage Rating (max): 30VVDC
• Contact Material: Silver Alloy
• Contact Plating: Silver
• Housing Material: Diallyl Phthalate/Stainless Steel
• Mechanical Life: 50000
• Product Height (mm): 43mm
• Product Depth (mm): 12.7mm
• Operating Temperature Min Deg. C: -10C
• Product Length (mm): 13mm
• Operating Temperature Max Deg. C: 55C
• Mounting Style: Panel Mount with Threads
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 360-2311; M2112TCFW01-RO; M2112TCFW01-RO

B
General
Series M2100
B92
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
Standards & Certifications
Nominal Operating Force:
Flammability Standards:
Operating Temp Range:
Soldering Time & Temp:
Insulation Resistance:
Stationary Contacts:
Power Level (silver):
Contact Resistance:
Dielectric Strength:
Movable Contacts:
Mounting Bracket:
Logic Level (gold):
Switch Terminals:
Mechanical Life:
Angle of Throw:
Lamp Terminals:
Lamp Contacts:
Electrical Life:
Vibration:
Humidity:
Cleaning:
Housing:
Shock:
Base:
CSA:
UL:
Specifications
6A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
50,000 operations minimum
25,000 operations minimum
Paddles
Rockers
20°
Stainless steel
Steel with tin plating
Silver alloy or silver alloy with gold plating
Silver with silver plating or copper or brass with gold plating
Phosphor bronze
Diallyl phthalate (UL94V-0)
Copper with silver or gold plating
Brass with silver or gold plating
–10°C through +55°C (+14°F through +131°F) for rockers
–25°C through +70°C (–13°F through +158°F) for paddles
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
Wave Soldering (PC version): See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Note: Lever must be in center position while soldering.
PC mountable device is not process sealed. Hand clean locally using alcohol based solution.
UL94V-0 base
File No. E44145
Single pole rockers with synchronous circuits & solder lug or PC recognized at 6A @ 125V AC.
Add “/U” to end of part number to order UL mark on switch.
File No. 023535_0_000
All single pole rockers with synchronous circuits certified at 6A @ 125V AC.
Add “/C” to end of part number to order CSA mark on switch.
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
www.nkk.com
Double Pole
Double Pole
Single Pole
Single Pole
On-to-On Position
LED Tipped Rockers & Paddles
13.73N
3.19N
4.41N
6.37N
Off-to-On Position
17.65N
3.92N
7.06N
9.80N