P6KE24CAE3/TR13

Manufacturer Part NumberP6KE24CAE3/TR13
DescriptionTRANS VOLT SUPP 24V 600W BIDIR
ManufacturerMicrosemi Commercial Components Group
SeriesP6KE
P6KE24CAE3/TR13 datasheet
 


Specifications of P6KE24CAE3/TR13

Voltage - Reverse Standoff (typ)20.5VVoltage - Breakdown22.8V
Power (watts)600WPolarizationBidirectional
Mounting TypeThrough HolePackage / CaseT-18, Axial
Lead Free Status / RoHS StatusLead free / RoHS CompliantOther namesP6KE24CAE3/TR13TR
P6KE24CAE3MSTR
P6KE24CAE3MSTR
P6KE24CAMSTR
P6KE24CAMSTR
1
Page 1
2
Page 2
3
Page 3
4
Page 4
Page 1/4

Download datasheet (241Kb)Embed
Next
S C O T T S D A L E D I V I S I O N
DESCRIPTION
This P6KE series is an economical 600 W Transient Voltage Suppressor (TVS)
for protecting voltage-sensitive components from destruction or degradation. It
is available in both unidirectional and bi-directional configurations as well as
RoHS Compliant (annealed matte-Tin finish) with an e3 suffix added to the part
number. The response time of their clamping action is virtually instantaneous.
As a result, they may also be used effectively for protection from ESD or EFT
per IEC61000-4-2 and IEC61000-4-4 or for inductive switching environments
and induced RF.
They can also be used for protecting other sensitive
components from secondary lightning effects per IEC61000-4-5 and class
levels defined herein. Microsemi also offers numerous other TVS products to
meet higher and lower power demands and special applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website:
FEATURES
Available in both unidirectional and bidirectional
(add C or CA suffix to part number for bidirectional)
Optional 100% screening for avionics grade is
available by adding MA prefix to part number for added
o
100% temperature cycle -55
C to +125
as surge (3X) and 24 hours HTRB with post test V
I
(in the operating direction for unidirectional or both
R
directions for bidirectional)
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, and JANTXV are available by
adding MQ, MX, or MV prefixes respectively to part
numbers.
Surface mount equivalents available as SMBJP6KE6.8
to SMBJP6KE200CA or SMBJ5.0 to SMBJ170CA
(consult factory for other surface mount options)
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding “e3” suffix
MAXIMUM RATINGS
• Peak Pulse Power dissipation at 25
10/1000 μs (also see Fig 1,2, and 3).
• Impulse repetition rate (duty factor): 0.01%
• t
(0 volts to
min.): < 100 ps theoretical for
V
clamping
(BR)
unidirectional and < 5 ns for bidirectional
• Operating and Storage temperature: -65
o
• Thermal Resistance: 25
C/W at 3/8 inch (10 mm) lead
length from body, or 85°C/W junction to ambient when
mounted on FR4 PC board with 4 mm
oz) and track width 1 mm, length 25 mm
• Steady-State Power: 5 watts @ T
mm) from body, or 1.47 W when mounted on FR4 PC
board described for thermal resistance
o
• Forward Voltage at 25
C: 3.5 Volts maximum @ 100
Amp peak impulse of 8.3 ms half-sine wave
(unidirectional only)
o
• Solder temperatures: 260
C for 10 s (maximum)
Copyright © 2007
6-20-2007 REV G
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
P6KE6.8 thru 200CA, e3
600 Watt TRANSIENT VOLTAGE
SUPPRESSOR
http://www.microsemi.com
Selections for 6.8 to 200 volts breakdown (V
Economical TVS series for thru-hole mounting
Protects sensitive components such as IC’s,
CMOS, Bipolar, BiCMOS, ECL, DTL, T
o
C (10X) as well
Protection from switching transients & induced RF
&
Z
Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1: P6KE6.8 to P6KE130A or CA
Class 2: P6KE6.8 to P6KE68A or CA
Class 3: P6KE6.8 to P6KE36A or CA
Class 4: P6KE6.8 to P6KE18A or CA
Secondary lightning protection per IEC61000-4-5
with 12 Ohms source impedance:
Class 1: P6KE6.8 to P6KE43A or CA
Class 2: P6KE6.8 to P6KE22A or CA
MECHANICAL AND PACKAGING
o
C: 600 watts at
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
FINISH: Tin-Lead or RoHS Compliant annealed
matte-Tin plating readily solderable per MIL-STD-
750, method 2026
MARKING: Body marked with part number
o
o
C to +150
C
POLARITY: Band denotes cathode. Bidirectional
not marked
2
WEIGHT: 0.7 grams (approximate)
copper pads (1
TAPE & REEL option: Standard per EIA-296 (add
o
“TR” suffix to part number)
=25
C 3/8 inch (10
L
See package dimensions on last page
Microsemi
Scottsdale Division
APPEARANCE
T-18
APPLICATIONS / BENEFITS
BR
2
L, etc.
Page 1
)

P6KE24CAE3/TR13 Summary of contents

  • Page 1

    DESCRIPTION This P6KE series is an economical 600 W Transient Voltage Suppressor (TVS) for protecting voltage-sensitive components from destruction or degradation. It ...

  • Page 2

    ELECTRICAL CHARACTERISTICS BREAKDOWN VOLTAGE MICROSEMI PART V (BR) NUMBER Min. Nom P6KE6.8 6.12 6.8 P6KE6.8A 6.45 6.8 P6KE7.5 ...

  • Page 3

    BREAKDOWN VOLTAGE MICROSEMI PART V (BR) NUMBER Min. Nom P6KE100 90 100 P6KE100A 95 100 P6KE110 99 110 ...

  • Page 4

    Lead Temperature C L FIGURE 3 - Derating Curve Copyright © 2007 6-20-2007 REV G 8700 E. Thomas Rd. PO ...