192993-0073 ITT Cannon, 192993-0073 Datasheet - Page 81

no-image

192993-0073

Manufacturer Part Number
192993-0073
Description
TRI TNM RECP M FLG SEAL 0-12
Manufacturer
ITT Cannon
Datasheet

Specifications of 192993-0073

Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
I192993-0073
Cannon Trident Connectors
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Universal Endbell
The Universal Endbell is suitable to accept
shielded and unshielded cable. This cable is
sealed with a highly flexible seal and an
additional sealing ring with a flexible plastic
cable clamp serving as a strain relief. The
Universal Endbell can be screwed onto plug
and receptacle connectors. The O-ring and
the cable sealing meet IP67.
Assembly Instructions:
1. Slide O-ring over the back of the
connector body.
2. Slide the endbell components onto
the cable in the following order:
Note: 1. The compression fingers of the
Cable Grip face toward the connector.
Note: 2. Isopropyl alcohol will lubricate the
Cable Seal making it easier to slide over the
cable.
3. Cut back the Outside Jacket to expose
25,40 (1.000) of Braid followed by 12,70
(.500) of Insulated Wires.
4. Terminate the wires and insert contacts
per assembly instructions, see page 77.
5. Slide the Support Sleeve down until it
reaches the back of the connector.
6. Pull the Braid over the Grounding Ring.
7. Slide the Grounding Ring down until it
snaps onto the Support Sleeve. The Braid
should be secured between the Support
Sleeve and the Grounding Ring. Fold any
excess shielding over the Grounding Ring.
8. Slide the Housing over the Grounding
Ring and the Support Sleeve and screw it
into the connector body. The recommended
torque is 10 ± 1 Nm (88.50 in lbs).
9. Slide the Cable Seal and Cable Grip onto
the Housing.
10. Tighten the Clamp Nut into the
Housing. The recommended torque is
10 ± 1 Nm (88.50 in lbs).
Clamp Nut
Cable Grip1
Cable Seal2
Housing
Grounding Ring
Support Sleeve
O-Ring
Universal Endbell Assembly
Wire Strip Length
* Strip length will vary based on the contact selected, see page 64-65.
Shell Size
10
12
14
16
81
38,00 (1.500)
38,00 (1.500)
40,00 (1.600)
40,00 (1.600)
A
Wire Strip Length
Assembly Instructions
22,00 (.870)
22,00 (.870)
24,00 (.950)
24,00 (.950)
B
C
*
*
*
*

Related parts for 192993-0073