UMSH-3267MD-1UB Microtips Technology, UMSH-3267MD-1UB Datasheet - Page 18

LCD Character Display Modules 20x2 VLCD Character Red LED Backlight

UMSH-3267MD-1UB

Manufacturer Part Number
UMSH-3267MD-1UB
Description
LCD Character Display Modules 20x2 VLCD Character Red LED Backlight
Manufacturer
Microtips Technology
Datasheet

Specifications of UMSH-3267MD-1UB

Character Count X Line
20 x 2
Module Size (w X H X T)
37 mm x 116 mm x 17.2 mm
Voltage Rating
5 V
Operating Temperature Range
- 30 C to + 80 C
Backlight Type
LED Red
Display Mode
Transmissive
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
UMSH-3267MD-1UB
Manufacturer:
MT
Quantity:
20 000
5. PRODUCT HANDLING AND APPLICATION
● The LCD module contains a C-MOS LSI. People who operate the LCM should wear
● Do not input any signal before power is turned on.
● Do not take LCM from its packaging bag until it is assembled.
● Peel off the LCM protective film slowly since static electricity may be generated.
● Pay attention to the humidity of the work shop, 50~60%RH is satisfactory.
● Use a non-leak iron for soldering LCM.
● Do not touch the display surface or connection terminals area with bare hands.Smudges on
● Cautions for soldering to LCM:
● Do not contact or scratch the front surface and the contact pads of a LCD panel with hard
● To clean the surface , wipe it gently with soft cloth dampened by alcohol.
● Do not attempt to wiped off the contact pads.
● Keep LCD panels away from direct sunlight , also avoid them in high-temperature & high
● Do not drive LCD panels by DC voltage.
● Do not expose LCD panels to organic solvent.
● Liquid in LCD is hazardous substance. In case a contact with liquid crystal material is occured,
● The polarizer is easily damaged and should be handle with special care. Don’ t press or rub it
● To avoid degradation of the device , do not store the module under the conditions of direct
● For the application in medical care, safety and hazardous prodcuts or systems, an
PRECAUTION IN USE OF LCD
PRECAUTION FOR HANDLING LCM
PRECAUTION FOR STORING LCM
USING ON MEDICAL CARE , SAFETY OR HAZARDOUS APPLICATION OR SYSTEM
ESD protection eguipement to prevent ESD hurt on products.
the display surface reduce the insulation between terminals.
Condition for soldering I/O terminals:
Temperature at iron tip :350 ℃ ±15 ℃ .
Soldering time : 3~4sec./ terminals.
Type of solder : Eutectic solder(rosin flux filled).
materials such as metal or glass or with one’ s nail.
humidity environment for a long period.
be sure to immediately wash such material away by soap and water.
with hard objects.
This product is not allowed to be designed and used for military application and/or purpose.
The delivery of this product to the countries and/or regions where the embargoes
The application and delivery of this product must comply with Startegic High-Tech Commodities (SHTC)
sunlight , high temperature or high humidity . Keep the module in bags designed to prevent
static electricity charging under low temperature / normal humidity conditions(avoid high
temperature / high humidity and low temperature below 0 ℃ )
authorization from us is required. We will not responsible for any damage or loss
which caused by the products without any authorization given by us.
export control and the sales to the embargoed and/or sanctioned countries or regions are strictly prohibited.
are imposed by U.N. is prohibited.
Revision 1 ; UMSH-3267MD-1UB Ver. 0 ; September-04-2009
Page:
18

Related parts for UMSH-3267MD-1UB