EA STARTEDIP320J ELECTRONIC ASSEMBLY, EA STARTEDIP320J Datasheet - Page 5

• Manufacturer Part Number: EA STARTEDIP320J
• Description: LCD Graphic Display Modules & Accessories Starter/Demoboard w/Touch USB prog
• Manufacturer: ELECTRONIC ASSEMBLY

Specifications of EA STARTEDIP320J

• Pixel Density: 320 x 240
• Fluid Type: FSTN Positive
• Module Size (w X H X T): 121 mm x 92.6 mm x 11.6 mm
• Viewing Area (w X H): 115.18 mm x 86.38 mm
• Backlighting: Black / White
• Background Color: White
• Operating Temperature Range: - 20 C to + 70 C
• Attached Touch Screen: Yes
• Interface: RS-232, I2C BUS, or SPI BUS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Specifications may be changed without
EA eDIP320-8
prior notice. Printing error reserved
Page 5
APPLICATION EXAMPLE „REAL“ RS-232 INTERFACE
The eDIP fits for direct
connection to a RS-232
interface with 5V level.
If you have an interface
with ±12V level, an
external levelshifter is
needed
application example
APPLICATION EXAMPLE: RS-485 INTERFACE
With an external converter (e.g.
SN75176), the EA eDIP320 can
be connected to a 2-wire RS-
485 bus. Large distances of up
to 1200 m can thus be
implemented (remote display).
Several EA eDIP320 displays
can be operated on a single RS-
485 bus by setting addresses.
We recommend the EA 9778-
Applikationsbeispiel
1RS485 board for development.
Addressing:
- Up to eight hardware addresses (0 to 7) can be set by means of Pins ADR0..ADR2
- The eDIP with the address 7 is selected and ready to receive after power-on.
- The eDIPS with the addresses 0 to 6 are deselcted after power-on
- Up to 246 further software addresses can be set by means of the ‘#KA adr’ command in the power-on macro (set eDIP externally to address 0)
APPLICATION EXAMPLE: USB INTERFACE
With an external converter (e.g. FTZ232R) from FTDI the eDIP can be connected to an USB-Bus.
Virtual-COM-Port drivers are available for different Systems on the FTDI Homepage:
http://www.ftdichip.com/drivers/vcp.htm.
Applikationsbeispiel