V2-EVAL-EXT48 FTDI, V2-EVAL-EXT48 Datasheet - Page 13

Interface Modules & Development Tools USB V2-EVAL Daughter Module 48-pin

V2-EVAL-EXT48

Manufacturer Part Number
V2-EVAL-EXT48
Description
Interface Modules & Development Tools USB V2-EVAL Daughter Module 48-pin
Manufacturer
FTDI
Datasheets

Specifications of V2-EVAL-EXT48

Interface Type
USB, Serial, UART, FIFO, SPI
Data Bus Width
Serial, 8 bit
Operating Supply Voltage
4.75 V to 5.25 V
Product
Interface Modules
Silicon Manufacturer
FTDI
Silicon Family Name
Vinculum II
Features
Embedded USB Host / Slave Chip, Two USB Type A Connectors
Svhc
No SVHC (18-Jun-2010)
Rohs Compliant
Yes
Kit Features
Module With 48-pin QFN VNC2
For Use With/related Products
VNC2-48
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
V2-EVAL Kit
Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 1.0
Clearance No.: FTDI#148
4.2
Testing the board.
Ensure that the Power Select jumper JP6 is in ‘P.S.’ position (pins 2 & 3 shorted), to enable the board to
be powered from the external power adapter.
Connect the 5V DC/1A power supply included in V2-Eval Kit to the external input power adapter
connector (CN12), connect USB A/B cable to USB B connector (CN13) on V2-Eval Board and to a free
USB port on host PC. Switch SW1 to the ON position (towards board edge). LED2 – POWER should now
be on.
Figure 4.2
Power connector with Jumper JP6.
The PCB circuitry will draw power either directly from the board 5V supply or from a 3.3V regulator that is
powered by this 5V supply. This includes the VNC2 daughterboard module that is installed on the board.
Upon power up, the power LED (LED2) will illuminate.
Copyright © 2010 Future Technology Devices International Limited
12

Related parts for V2-EVAL-EXT48