V2-EVAL-EXT48 FTDI, V2-EVAL-EXT48 Datasheet - Page 4

• Manufacturer Part Number: V2-EVAL-EXT48
• Description: Interface Modules & Development Tools USB V2-EVAL Daughter Module 48-pin
• Manufacturer: FTDI

Specifications of V2-EVAL-EXT48

• Interface Type: USB, Serial, UART, FIFO, SPI
• Data Bus Width: Serial, 8 bit
• Operating Supply Voltage: 4.75 V to 5.25 V
• Product: Interface Modules
• Silicon Manufacturer: FTDI
• Silicon Family Name: Vinculum II
• Features: Embedded USB Host / Slave Chip, Two USB Type A Connectors
• Svhc: No SVHC (18-Jun-2010)
• Rohs Compliant: Yes
• Kit Features: Module With 48-pin QFN VNC2
• For Use With/related Products: VNC2-48
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: V2-EVAL Kit

1
The following document details the features and specifications of the V2-EVAL board. The V2-EVAL is a
hardware platform designed to support easy evaluation of FTDI’s Vinculum-II (VNC2) series of
embedded USB host controller devices.
The V2-Eval kit includes the following hardware items as standard
NOTE:
The V2-EVAL kit requires a VNC2 based daughterboard module to be installed into the V2-EVAL
base board socket site, in order to enable development with the kit.
Daughterboard modules are sold separately, with 3 versions available for 32-pin, 48-pin and 64-pin
package devices.
http://www.ftdichip.com.
Before you proceed:
Please check that all the contents of the package are not damaged.
Ensure that your kit includes a proper version of the power supply, depending on the region where you
live. Eval application software and project examples can be downloaded from:
1.1
Static discharge precaution – Without proper anti-static handling the board can be damaged.
Therefore, take anti-static precautions while handling the board.
1.2
The V2-Eval Board must be stored between -40°C and 80°C. The recommended operating temperature is
between 0°C and 55°C




Introduction
1 x V2-Eval base board.
1 x 5V/1A mains adapter PSU – UK, US, European and Japanese versions available.
1 x USB A/B cable to connect to a host PC in programming / terminal emulation or debugging
modes.
1 x USB gender changer for USB slave mode applications.
Handling the board
Environmental requirements
Figure 1.1 -
Daughterboard modules can be purchased from FTDI or via our website
Copyright © 2010 Future Technology Devices International Limited
V2-EVAL Motherboard(left) with Daughterboard Module(right)
V2-EVAL Vinculum II Evaluation Board Datasheet Version 1.0
Document Reference No.: FT_000247
Clearance No.: FTDI#148
http://www.ftdichip.com
3