V2-EVAL-EXT32 FTDI, V2-EVAL-EXT32 Datasheet - Page 32

• Manufacturer Part Number: V2-EVAL-EXT32
• Description: Interface Modules & Development Tools USB V2-EVAL Daughter Module 32-pin
• Manufacturer: FTDI

Specifications of V2-EVAL-EXT32

• Interface Type: USB, Serial, UART, FIFO, SPI
• Data Bus Width: Serial, 8 bit
• Operating Supply Voltage: 4.75 V to 5.25 V
• Product: Interface Modules
• Silicon Manufacturer: FTDI
• Silicon Family Name: Vinculum II
• Features: Embedded USB Host / Slave Chip, Two USB Type A Connectors
• Svhc: No SVHC (18-Jun-2010)
• Rohs Compliant: Yes
• Kit Features: Module With 32-pin QFN VNC2
• For Use With/related Products: VNC2-32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: V2-EVAL Kit

Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 1.0
Clearance No.: FTDI#148
5.14
Remote Wakeup jumper JP3.
Figure 5.19
Remote Wakeup Jumper.
The remote wakeup jumper enables any firmware running on the VNC2 to support Suspend Monitor
(SUM) mode, allowing the device to reduce power consumption when idle. The VNC2 device can be
configured to wakeup when any data arrives on the receive data (RXD) pin, by connecting the RXD pin
to ring indicator (RI#) input via jumper JP3. When RI# pin is driven low, VNC2 will resume from the
SUM mode immediately. The remote wakeup feature is only available when using the UART interface
on the VNC2. The feature can be enabled when a jumper is present on jumper JP3.
Copyright © 2010 Future Technology Devices International Limited
31