VNC2 DEBUG MODULE FTDI, VNC2 DEBUG MODULE Datasheet - Page 4

• Manufacturer Part Number: VNC2 DEBUG MODULE
• Description: Interface Modules & Development Tools USB Vinculum-II Debug/Programmer Mod
• Manufacturer: FTDI

Specifications of VNC2 DEBUG MODULE

• Interface Type: USB, Serial, UART, FIFO, SPI
• Data Bus Width: Serial, 8 bit
• Operating Supply Voltage: 5 V
• Product: Interface Development Tools
• Ic Product Type: Debugger / Programmer
• Kit Contents: Miniature Board, USB Connector
• Features: Low USB Bandwidth Consumption, Programming And Debugging For VNC2 IC Designs
• Svhc: No SVHC (18-Jun-2010)
• Rohs Compliant: Yes
• Supported Devices: VNC2
• For Use With/related Products: VNC2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2
2.1 Features
The VNC2 debug module incorporates
2.2 Software Drivers
USB drivers for the FT232R device, featured on the VNC2 debug module, are available from
http://www.ftdichip.com.
2.3 Part Number
The part number for the board is- VNC2 DEBUG MODULE
One USB ‘miniB’ type socket to connect with a
PC.
Onboard FTDI FT232R which provides
conversion from USB to serial interface for
VNC2 debug port.
Low USB bandwidth consumption.
USB2.0 Full Speed compatible.
UHCI/OHCI/EHCI host controller compatible.
5V Power output to V2DIP-x module (if
needed).
Applications
Enable firmware programming of VNC2 devices on V2DIPx-x development modules and custom
VNC2 based hardware.
Debug firmware code running on a VNC2 device.
Copyright © 2010 Future Technology Devices International Limited
`
the following features
USB powered.
Programming and debugging for VNC2 IC
designs.
Power and traffic indicator LEDs
6 way, keyed connector to support FTDI’s
range of V2DIPx-x development modules.
VNC2 debug module is a Pb-free, RoHS
complaint development module.
-40℃ to +85℃ operating temperature range.
:
VNC2 Debug Module Datasheet Version 1.0
Document Reference No.: FT_000254
Clearance No.: FTDI# 149
3