V2-EVAL (UK) FTDI, V2-EVAL (UK) Datasheet - Page 14

Interface Modules & Development Tools USB Vinculum-II Eval Kit UK Power Supply

V2-EVAL (UK)

Manufacturer Part Number
V2-EVAL (UK)
Description
Interface Modules & Development Tools USB Vinculum-II Eval Kit UK Power Supply
Manufacturer
FTDI
Datasheet

Specifications of V2-EVAL (UK)

Interface Type
USB, Serial, UART, FIFO, SPI
Data Bus Width
Serial, 8 bit
Operating Supply Voltage
4.75 V to 5.25 V
Product
Interface Modules
For Use With/related Products
VNC2
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 1.0
Clearance No.: FTDI#148
5 Detailed Description of Board Components.
5.1
Power Select Jumper JP6.
Figure 5.1
Power Select Jumper Configuration for USB Power.
V2-Eval Board can draw its power either from the external 5V/1A DC Power Supply or from the USB
interface when connected to a USB host via the B type connector (CN13). To enable USB power supply
feature, switch the jumper JP6 to USB position, pins 1&2 shorted (pin 1 has a rectangle shaped pad on
the bottom side of the board).
Warning!
Please remember that every device connected to the PC through USB port can draw NO MORE
than 500mA from the USB host PC 5V power bus.
Copyright © 2010 Future Technology Devices International Limited
13

Related parts for V2-EVAL (UK)