V2-EVAL (UK) FTDI, V2-EVAL (UK) Datasheet - Page 31

• Manufacturer Part Number: V2-EVAL (UK)
• Description: Interface Modules & Development Tools USB Vinculum-II Eval Kit UK Power Supply
• Manufacturer: FTDI

Specifications of V2-EVAL (UK)

• Interface Type: USB, Serial, UART, FIFO, SPI
• Data Bus Width: Serial, 8 bit
• Operating Supply Voltage: 4.75 V to 5.25 V
• Product: Interface Modules
• For Use With/related Products: VNC2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.12
Push button switches connected straight to VNC2 pins. When the switch is pressed down,
a logic LOW appears on the corresponding VNC2 pin.
Designator
SW3
SW4
SW5
SW6
Notes:
When either USB1 and/or USB2 ports are used as a host ports, the jumpers JP4 and/or JP5 accordingly
should be closed to allow peripheral devices to draw power from board’s +5V power rail.
Warning!
When using USB1 and USB2 ports as a USB slave ports, remove the shunts from jumpers JP4
and JP5. Failure to do so could cause damage to the USB host or to the V2-EVAL board.
Table 5.16
5.13
(40) The IOBUS pins are shared by other connectors on the board. Care should be taken to
(40)
(40)
(40)
(40)
Figure 5.17
Figure 5.18
ensure that operation of the switches does not interfere with pins used by other headers
on the board.
User push button switches
Host USB power jumpers JP4, JP5.
User Switches
User Push Button Switches.
USB Power Enable Jumpers JP4 and JP5
Copyright © 2010 Future Technology Devices International Limited
32-PIN
15
-
-
-
V2-EVAL Vinculum II Evaluation Board Datasheet Version 1.0
VNC2 Pin Number
48-PIN
14
48
42
43
.
Document Reference No.: FT_000247
64-PIN
14
32
48
49
Clearance No.: FTDI#148
30