FT4232H MINI MODULE FTDI, FT4232H MINI MODULE Datasheet - Page 8

• Manufacturer Part Number: FT4232H MINI MODULE
• Description: Interface Modules & Development Tools USB Hi-Speed FT4323H Evaluation Module
• Manufacturer: FTDI

Specifications of FT4232H MINI MODULE

• Interface Type: USB, Serial, UART, I2C, JTAG, SPI
• Data Bus Width: Serial
• Operating Supply Voltage: 3.3 V, 5 V
• Product: Interface Modules
• For Use With/related Products: FT4232H
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FT4232HQ_MINI_MODULE

Table 3.2 FT4232H Mini Module Connection – CN3
In most cases, the FT4232H pin is connected directly to the associated pin on CN2 or CN3.
The FT4232H Mini Module allows configuration with both USB Bus-powered designs and USB Self-
powered designs:
USB Bus-powered:
USB Self-Powered:
1) Connect VBUS to VCC (CN3, pin 1 to CN3, pin 3). This connection takes the power from the
2) Connect V3V3 to VIO (CN2, pins 1, 3 & 5 to CN2, pins 11 & 21 and CN3, pins 12 & 22).
1) Leave VBUS (CN3, pin 1) unconnected.
2) Connect an external 5.0VDC power supply to VCC (5.0VDC to CN3, pin 3). This
3) Connect V3V3 to VIO (CN2, pins 1, 3 & 5 to CN2, pins 11 & 21 and CN3, pins 12 & 22).
4) Use MPROG to change the USB power descriptor to “Self-Powered”. This setting indicates
CN3-20
CN3-21
CN3-22
CN3-23
CN3-24
CN3-25
CN3-26
USB bus (VBUS) and connects it to the voltage regulator input on the FT4232H Mini Module. The
voltage regulator, in turn, provides V3V3, VPLL and VUSB power inputs to the FT4232H chip.
This connection provides the correct 3.3VDC operating voltage for VCCIO on the FT4232H chip.
connection takes provides power from an external power supply and connects it to the voltage
regulator input on the FT4232H Mini Module. See the FT4232H data sheet for allowable VCC
input voltage ranges.
This connection provides the correct 3.3VDC operating voltage for VCCIO on the FT4232H chip.
to the host system that the USB Host port does not need to supply power to the device. MPROG
is a utility provided by FTDI to program various features of the FT-series USB client ICs. In order
to access settings for the FT4232H, MPROG, version 3.5 or later is required.
through the
Utilities
Copyright © 2011 Future Technology Devices International Limited
CD5
CD4
CD3
CD2
CD1
CD0
VIO
`
section of the
FT4232H Mini Module USB Hi-Speed FT4323H Evaluation Module Datasheet
FT4232H CD5 pin
FT4232H CD4 pin
Connected to all FT4232H VCCIO pins (input)
FT4232H CD3 pin
FT4232H CD2 pin
FT4232H CD1 pin
FT4232H CD0 pin
FTDI web
site.
Document Reference No.: FT_000115
Clearance No.: FTDI#73
MPROG
is available
Version 1.6
7