USB-ISO Olimex Ltd., USB-ISO Datasheet

Page 1

... USB-ISO - USB 2.0 compliant, 1000VDC USB Full Speed isolator All boards produced by Olimex are ROHS compliant Copyright(c) 2010, OLIMEX Ltd, All rights reserved Users Manual Rev. B, March 2010 Page1 ...

Page 2

... USB host can provide, there is external power supply option you can connect any power supply adapter which provides power supply from +8 to +15VDC and USB-ISO internal DC-DC will convert it to 5VDC for the USB device. Note that in this case the external power supply should be ...

Page 3

... ELECTROSTATIC WARNING The USB-ISO board is shipped in protective anti-static packaging. The board must not be subject to high electrostatic potentials. General practice for working with static sensitive devices should be applied when working with this board. BOARD USE REQUIREMENTS Cables: You need two 1.8 meter USB A-B cable to connect to the PC and to your USB isolated device ...

Page 4

... USB_DEVICE This connector is used to connect to the PC USB host Pin # Signal Name 1 +5V_USB_DEV 2 DEV_D- 3 DEV_D+ 4 GND_DEV USB_HOST This connector is used to connect to you USB device – programmer, debugger etc which you want to isolate from your PC. Pin # Signal Name 1 HOST_PWR 2 HOST_D- 3 HOST_D+ 4 GND_HOST PWR_JACK This connector is for additional power supply to USB device ...

Page 5

MECHANICAL DIMENSIONS All measures are in inches. Page5 ...

Page 6

... ORDER CODE USB-ISO How to order? You can order to us directly or by any of our distributors. Check our web Revision history: REV. A REV. B – assembled and tested www.olimex.com/dev for more info. - create October 2009 - edited by TU March 2010 Page6 ...

Page 7

... This document is intended only to assist the reader in the use of the product. OLIMEX Ltd. shall not be liable for any loss or damage arising from the use of any information in this document or any error or omission in such information or any incorrect use of the product ...