FLASHPRO LITE Actel, FLASHPRO LITE Datasheet - Page 2

no-image

FLASHPRO LITE

Manufacturer Part Number
FLASHPRO LITE
Description
Programmers & Debuggers ProAsic Plus Programmer
Manufacturer
Actel
Datasheet

Specifications of FLASHPRO LITE

Positions/sockets
1
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
2.
3.
Common Issues
If you see two blinking LEDs on the programmer after you have connected the programmer to the
parallel port, make sure the parallel port cable is connected firmly to the PC parallel port. For more
information, refer to the FlashPro Software and Hardware Installation Guide and the “Known Issues
and Workarounds” section of the FlashPro software release notes:
program_debug/flashpro.
Documentation Resources
For further FlashPro software and FlashPro Lite device programmer information, including user's
guide, installation guide, tutorial, and application notes, refer to the FlashPro software page:
www.actel.com/products/hardware/program_debug/flashpro.
Technical Support and Contacts
Technical support is available online at www.actel.com/support, by email at tech@actel.com, or by
phone:
Actel Sales offices, including Representatives and Distributors, are located worldwide. To find your
local representative go to: www.actel.com/company/contact.
Phone (NA): 800.262.1060
Phone (Int'l): +1 650.318.4460
Verify that you are connected to the correct parallel port on your computer. Actel recommends
that you dedicate a port to the programmer. Connecting to a serial port or a third-party card can
damage the programmer. This type of damage is not covered by the warranty.
Connect the FlashPro Lite ribbon cable to the programming header and turn the target board
on.
FlashPro Lite Device Programmer Quickstart Card
www.actel.com/download/
50200200-0/10.09

Related parts for FLASHPRO LITE