WM8974GEFL/V Wolfson Microelectronics, WM8974GEFL/V Datasheet - Page 42

Audio CODECs Mono Codec with Spkr

WM8974GEFL/V

Manufacturer Part Number
WM8974GEFL/V
Description
Audio CODECs Mono Codec with Spkr
Manufacturer
Wolfson Microelectronics
Datasheet

Specifications of WM8974GEFL/V

Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Package / Case
QFN-24
Minimum Operating Temperature
- 25 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
WM8974
w
ANALOGUE OUTPUTS
Figure 20 Speaker and Mono Analogue Outputs
The WM8974 has a single MONO output and two outputs SPKOUTP and SPOUTN for driving a
mono BTL speaker. These analogue output stages are supplied from SPKVDD and are capable of
driving up to 1.5V rms signals (equivalent to 3V rms into a bridge tied speaker) as shown in Figure
20.
The Mono and speaker outputs have output driving stages which can be controlled by the register
bits MONOBOOST and SPKBOOST respectively. Each output stage has a selectable gain boost of
1.5x.
1.5xAVDD/2) to prevent the signal from clipping. A dedicated amplifier, as shown in Figure 20, is
used to perform the DC level shift operation. This buffer must be enabled using the BUFDCOPEN
register bit for this operating mode. It should also be noted that if SPKVDD is not equal to or greater
than 1.5xAVDD this boost mode may result in signals clipping. Table 37 summarises the effect of
the SPKBOOST/MONOBOOST control bits.
When this boost is enabled the output DC level is also level shifted (from AVDD/2 to
PD, Rev 4.5, September 2008
Production Data
42

Related parts for WM8974GEFL/V