WM8510GEDS/V Wolfson Microelectronics, WM8510GEDS/V Datasheet - Page 16

Audio CODECs VoIP Mono CODEC

WM8510GEDS/V

Manufacturer Part Number
WM8510GEDS/V
Description
Audio CODECs VoIP Mono CODEC
Manufacturer
Wolfson Microelectronics
Datasheet

Specifications of WM8510GEDS/V

Operating Supply Voltage
- 0.3 V to + 7 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Package / Case
SSOP-28
Minimum Operating Temperature
- 25 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
WM8510
w
INPUT PGA VOLUME CONTROL
The input microphone PGA has a gain range from -12dB to +35.25dB in 0.75dB steps. The gain
from the MICN input to the PGA output and from the MIC2 amplifier to the PGA output are always
common and controlled by the register bits INPPGAVOL[5:0]. These register bits also affect the
MICP pin when MICP2INPPGA=1.
When the Automatic Level Control (ALC) is enabled the input PGA gain is then controlled
automatically and the INPPGAVOL bits should not be used.
Table 1 Input PGA Volume Control
MIC 2 INPUT
A second mic input circuit, MIC2 (Figure 7) is provided which consists of an amplifier which can be
configured either as an inverting buffer for a single input signal or as a mixer/summer for multiple
inputs with the use of external resistors. The circuit is enabled by the register bit MIC2EN.
Figure 7 MIC2 Input Circuit
The MIC2MODE register bit controls the input mode of operation:
In buffer mode (MIC2MODE=0) the switch labelled MIC2SW in Figure 7 is open and the signal at the
MIC2 pin will be buffered and inverted through the MIC2 circuit using only the internal components.
R45
Input PGA
volume
control
R32
ALC control
1
REGISTER
ADDRESS
5:0
6
7
8
BIT
INPPGAVOL
INPPGAMUTE
INPPGAZC
ALCSEL
LABEL
010000
0
0
0
DEFAULT
Input PGA volume
000000 = -12dB
000001 = -11.25db
.
010000 = 0dB
.
111111 = +35.25dB
Mute control for input PGA:
0=Input PGA not muted, normal operation
1=Input PGA muted (and disconnected
from the following input BOOST stage).
Input PGA zero cross enable:
0=Update gain when gain register
changes
1=Update gain on 1
register write.
ALC function select:
0=ALC off (PGA gain set by INPPGAVOL
register bits)
1=ALC on (ALC controls PGA gain)
DESCRIPTION
PD, Rev 4.5 ,September 2008
st
zero cross after gain
Production Data
16

Related parts for WM8510GEDS/V