Ethernet device server that enables installed
serial devices to connect via a serial port to
the Internet over a 10/100BaseT Ethernet
LAN. Secure iLAN acts as a security gap
between the host application and the network.
hardware modifications to the host device.
Simply connect a serial cable from Secure
iLAN’s RS232 or RS485 connector to your
device, and an Ethernet cable from your local
area network to Secure iLAN’s RJ-45
is Connect One’s remotely updateable iChip
CO2128 Secure Internet Controller
eliminates the need for Internet programming
application. Connect One’s SerialNET
operating mode completely eliminates the
need for changes to the host application, as it
is a true plug-and-play operating mode.
SSL3/TLS1 socket, up to 10 simultaneous
active TCP/UDP sockets, and two listening
sockets. It also includes an HTTP web server
with two websites: one for configuration and
one for the application.
9VDC power supply. Alternatively, it can be
powered through pin 9 of the RS232/RS485
connector to the host device.
ARP, ICMP, IP, UDP, TCP, DHCP, DNS,
NTP, SMTP, POP3, MIME, HTTP, FTP and
Connect One’s AT+i protocol
SerialNET mode for transparent serial
Secure iLAN eliminates the need for any
The Internet engine inside Secure iLAN
Secure iLAN is powered by an external
is a secure serial-to-
Serial-to-Ethernet Device Server
AES-128/256, 3DES, RC-4, SHA-1 and MD-5
Protocols Accelerated in HW:
AES, 3DES and SHA
Size: 110x67x28mm (4.3x2.6x1.1”)
Weight: 96g (3.4 oz.)
Operating Temperature Range:
Power Supply Input: 6-24VDC. 9V power
Power Consumption: 0.8W @ 9VDC
Connectors: RS232/RS485, RJ-45, 2.1mm
Host Data Rate: Up to 1Mbps
Serial Data Format (AT+i mode):
Serial Data Format (SerialNET mode):
Flow Control: hardware (DTR, RTS, CTS,
(41° to 122°F)
supply included unless otherwise specified.
available through pin 9 of serial connector.
Asynchronous character; binary; 8 data
bits; no parity; 1 stop bit.
Asynchronous character; binary; 7 or 8
data bits; odd, even or no parity; 1 stop bit.
DSR) and software flow control
LNK – Link status
ACT – LAN activity
SNET – SerialNET mode activity
PWR – Power
One-year limited warranty
CE; FCC pending