Low Signal Relays - PCB STANDARD DPDT 24VDC

G6A-234P-ST-US-DC24

Manufacturer Part NumberG6A-234P-ST-US-DC24
DescriptionLow Signal Relays - PCB STANDARD DPDT 24VDC
ManufacturerOmron
SeriesG6A2
G6A-234P-ST-US-DC24 datasheets
 


Specifications of G6A-234P-ST-US-DC24

Coil TypeNon-LatchingCoil Current8.3 mA
Contact Form2 Form CCoil Voltage24 VDC
Power Consumption200 mWTermination StyleSolder Pin
Contact Rating0.30 A at 125 VAC, 1 A at 30 VDCContact ConfigurationDPDT
Contact Current Max2AContact Voltage Ac Nom125V
Contact Voltage Dc Nom30VCoil Voltage Vdc Nom24V
Current, Rating0.3⁄1 AAC⁄ADCDiameter, Mounting0.04 in.
Dielectric Rating1,000 VAC, 50⁄60 Hz for 1 minute between coil and contacts, 1,000 VAC, 50⁄60 Hz for 1 minute between contacts of different poles, 1,000 VAC, 50⁄60 Hz for 1 minute between contacts of same pole, 250 VAC, 50⁄60 Hz for 1 minute between set and reset coilsDimensions0.80 in. (Max.) L x 0.40 in. (Max.) W x 0.33 in. (Max.) H
FunctionSensitiveMaterial, ContactAgPd (Au Clad)
Mounting TypePCBNumber Of Pins8
Power, Rating125⁄60 VA⁄WRelay TypeElectro Mechanical
StandardsUL, CSATemperature, Operating, Maximum70 °C
Temperature, Operating, Minimum-40 °CTerminationSolder
Voltage, Control24 VDCVoltage, Rating125 VAC
Coil Resistance2.88kohmRohs CompliantYes
Lead Free Status / RoHS StatusLead free / RoHS CompliantOther namesDC24 G6A234PSTUS
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
Page 1/10

Download datasheet (596Kb)Embed
Next
Low Signal Relay
G6A
Fullly Sealed Relay with High Impulse Withstand
• High sensitivity — can be driven by digital circuits.
• Low-profile design allows use in 12.70 mm PC board rack.
• Surge withstand voltage meets FCC Part 68 regulation.
• Units can be mounted side by side due to low magnetic
leakage.
• Special models available for low thermoelectromotive force.
• Unique moving loop (permanent magnet) armature reduces
relay size, magnetic interference, and contact bounce time.
• Single or dual coil winding types available.
• RoHS Compliant
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G6A-274P-ST-US-DC12).
■ Non-latching
Type
Standard
Low-sensitivity
■ Latching
Single Coil
Type
Standard
Dual Coil
Type
Standard
Low-sensitivity
Contact form
DPDT
4PDT
- DISCONTINUED
DPDT
4PDT
- DISCONTINUED
Contact form
DPDT
4PDT
- DISCONTINUED
Contact form
DPDT
4PDT
- DISCONTINUED
DPDT
4PDT
- DISCONTINUED
C
R
FCC
Model
Ag (Au clad)
G6A-274P-ST-US
G6A-474P-ST-US
G6A-274P-ST40-US
G6A-474P-ST40-US
Model
Ag (Au clad)
G6AU-274P-ST-US
G6AU-474P-ST-US
Model
Ag (Au clad)
G6AK-274P-ST-US
G6AK-474P-ST-US
G6AK-274P-ST40-US
G6AK-474P-ST40-US
G6A
81
Low Signal Relay

G6A-234P-ST-US-DC24 Summary of contents

  • Page 1

    ... Unique moving loop (permanent magnet) armature reduces relay size, magnetic interference, and contact bounce time. • Single or dual coil winding types available. • RoHS Compliant Ordering Information To Order: Select the part number and add the desired coil voltage rating, (e.g., G6A-274P-ST-US-DC12). ■ Non-latching Type Standard Low-sensitivity ■ ...

  • Page 2

    ... This value was measured at a switching frequency of 60 operations/min and the criterion of contact resistance is 50 Ω. This value may vary depending on the switching frequency and operating environment. Always double-check relay suitability under actual operating con- ditions. 2. G6A-4 pole versions are discontinued. ■ Coil Data Standard Non-latching DPDT (G6A-274P-ST-US) ...

  • Page 3

    ... Standard Dual Coil Latching DPDT (G6AK-274P-ST-US) Rated Rated Coil voltage current resistance (VDC) (mA) (Ω) Set coil Armature Armature OFF 3 66.70 45 0.037 0.027 4.5 40.2 112 0.09 ...

  • Page 4

    ... Dual Coil Latching Low-sensitivity 4PDT (G6AK-474P-ST40-US Rated Rated Coil Coil inductance (ref. value) (H) voltage current resistance Set coil (VDC) (mA) (Ω) Armature OFF 3 120 25 0.02 0.02 4.5 79 ...

  • Page 5

    ... Approvals UL Recognized (File No. E41515) / CSA Certified (File No. LR31928 Ambient Temp. = 40°C Type Contact form G6A( )-274P-ST( )-US DPDT Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics individually defined in this catalog the general interest of product improvement, specifications are subject to change. ...

  • Page 6

    ... VDC, 0.05 inductive 0.03 234P 125 VAC, -274P 125 VAC, inductive inductive Rated operating current (A) Note: G6A-4 pole versions are discontinued. G6A 86 Low Signal Relay Ambient Temperature vs. Maximum Coil Voltage DPDT: 100, 180, 200 mW DPDT: 360, 400 mW 4PDT: 320, 360, 400 mW Ambient temperature (° ...

  • Page 7

    ... Internal Connections (Bottom View Mounting Holes (Bottom View) Tolerance: ±0.1 5.08 5.08 5.08 7.62 5.08 5.08 (1.2) 7.62 (1.2) (1.2) Mounting Holes (Bottom View) Tolerance: ±0.1 7.62 5.08 5.08 (1.2) 8 (1.2) 7.62 9 (1.2) (1.2) Eight, 1.0-dia. holes G6A 87 Low Signal Relay ...

  • Page 8

    ... Be sure to use a fail-safe circuit design that provides protection against contact failure or coil burnout. Otherwise, use a latching relay. G6A 88 Low Signal Relay Terminal Arrangement/ Internal Connections (Bottom View) 10 ...

  • Page 9

    ... Amendment: These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. Low Signal Relay G6A ...

  • Page 10

    ... E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 06/09 Cat. No. X301-E-1 G6A Low Signal Relay 2. Programmable Products. Seller shall not be responsible for the user's pro- gramming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a war- ranty ...