142-9407-001 Emerson Network Power, 142-9407-001 Datasheet

CONN SMA PLUG STRA. CRIMP GOLD

142-9407-001

Manufacturer Part Number
142-9407-001
Description
CONN SMA PLUG STRA. CRIMP GOLD
Manufacturer
Emerson Network Power
Series
SMAr
Datasheet

Specifications of 142-9407-001

Connector Style
SMA
Connector Type
Plug, Male Pins
Contact Termination
Crimp and Solder
Impedance
50 Ohm
Mounting Type
Free Hanging (In-Line)
Fastening Type
Threaded
Cable Group
RG-58, 141
Frequency - Max
12.4GHz
Features
Non-Magnetic
Frequency-max
12.4GHz
Body Style
Straight
Cable Type
RG58, RG141
Frequency Range
0 GHz to 12.4 GHz
Rf Series
SMA
Product
Various Connectors
Gender
Male
Shell Plating
Gold
Maximum Frequency
12.4 GHz
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Color
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
J664
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug (3-piece) - Captivated Contact
SMA Type Straight Plugs For Flexible Cable -
Crimp or Solder Contacts
CABLE TYPE
RG-58/u, 141
299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • +1 (507) 833-8822 • www.EmersonConnectivity.com
1.15 + .01f (GHz) 0-12.4 GHz
VSWR & FREQ. RANGE
SMA Non-Magnetic RF Connectors
Emerson Network Power Connectivity Solutions
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick braid or center conductor. Tin center con-
3. Assemble contact onto cable as shown.
4. Flare braid and slide body assembly over contact and under braid. Then seat body as-
ductor if contact will be solder attached. Do not tin center conductor if contact is to be
crimp attached. When stripping LMR-100 low loss cable, remove foil back to where cable
jacket is stripped. A wire stripper of correct size is recommended for this step. Slide heat
shrink (as applicable) and crimp sleeve onto jacket of cable.
Solder Attachment: Solder contact to center conductor through solder hole using .020
(0.51) diameter solder. Use a minimum amount of solder for a good joint.
Crimp Attachment: Crimp contact to center conductor using Johnson Components
Hand Tool 144-0000-910, setting #2, with positioner 141-0000-907. Crimp location should
be centered between end of contact and X-hole. Crimp attachment to solid center con-
ductor cables is not recommended.
sembly firmly onto contact. The cable may have to be held in a clamping fixture. Arrange
braid uniformly around crimp stem. Slide crimp sleeve forward and crimp using recom-
mended crimp tool. Slide heat shrink forward and shrink (as applicable).
GOLD PLATED
142-9407-001
RG-316 DS, 188 DS
RG-316/u, 188, 174
CABLE GROUP
RG-58/u, 141
PART NUMBER
142-9403-011
142-9404-011
142-9407-011
For Flexible Cable
CRIMP HEX
.128 (3.25)
.151 (3.83)
.213 (5.41)
TM
1

Related parts for 142-9407-001

142-9407-001 Summary of contents

Page 1

... RG-58/u, 141 SMA Type Straight Plugs For Flexible Cable - Crimp or Solder Contacts 299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • +1 (507) 833-8822 • www.EmersonConnectivity.com GOLD PLATED 142-9407-001 CABLE GROUP RG-316/u, 188, 174 RG-316 DS, 188 DS RG-58/u, 141 1. Identify connector parts. (3 piece parts) 2 ...

Page 2

... Thermal Shock: MIL-STD-202, Method 107, Condition B 4.0 Corrosion: MIL-STD-202, Method 101, Condition B 6.0 Shock: MIL-STD-202, Method 213, Condition I N/A Vibration: MIL-STD-202, Method 204, Condition D N/A Moisture Resistance: MIL-STD-202, Method 106 Emerson Network Power Connectivity Solutions Axial Force*(lbs) Torque (in-oz) N/A N 165 ...

Related keywords